Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Beleuchtung und elektrische Ausrüstung
Cleanroom Light Switch
A low-profile wall switch that combines a wipe-clean actuator with a flush gasketed plate and enclosed wiring box.
- Sealed Wipe-Clean Actuator
- Flush Stainless Plate
- Clear Circuit Identification
- Enclosed Rear Terminals
Produkteinführung
This switch presents a sealed rocker, membrane key or touch surface within a stainless cleanroom plate. The broad flange closes the wall opening and the rear box contains terminals away from the room cavity. Laser-etched function labels and a small status indicator can be incorporated without applied paper labels or projecting pilot devices.
Key Features
The flush plate aligns with modular wall panels for direct wiping.
Permanent engraving identifies the controlled lighting zone.
An optional indicator shows circuit state without a separate wall penetration.
The enclosed rear mechanism protects terminal screws from cleaning moisture.
Kunden Produktbedenken
A wall switch is touched frequently and must remain readable, sealed and operable with cleanroom gloves.
Narrow rocker gaps accumulate skin oils and disinfectant.A continuous membrane or sealed actuator removes the open perimeter slot.
Printed adhesive labels peel after chemical cleaning.Laser engraving provides permanent circuit identification.
Small switches are difficult to operate through gloves.A broad tactile actuator provides a clear positive response.
Cleaning fluid reaches exposed rear terminals.A sealed rear box and gland enclose the wiring connection.
Typische Anwendungen
Local cleanroom lighting switchingAirlock local switchingLaboratory task-light circuitsMaintenance override points
Technische Parameter
Typical configurable construction ranges for a cleanroom light switch are listed below.
| Core Material | Stainless front plate with sealed polymer membrane or rocker, switch mechanism and enclosed steel back box |
|---|---|
| Panel Dicke | 1.5-3.0 mm room-side plate thickness |
| Effektive Breite | 86-200 mm front-plate width |
| Maximale Länge | Up to 260 mm plate height for multi-control layouts |
| Stahl facing Dicke | 1.5-3.0 mm SUS304 or SUS316L front plate |
| Kerndichte | Approximately 7900-8000 kg/m³ for the stainless front plate |
| Thermische Leitfähigkeit | 14-16 W/(m·K) for the stainless plate |
| Oberfläche Finish | Fine-brushed stainless or white coated face with engraved legends and colored indicator |
| Gemeinsamer Typ | Flush plate with concealed gasket, sealed actuator and gland-connected rear switch box |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Single or multi-gang controlMembrane, rocker or capacitive touchIlluminated status indicatorMomentary or maintained contact
Planning a Cleanroom Light Switch specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
