Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Interruptor de luz limpia
A low-profile wall switch that combines a wipe-clean actuator with a flush gasketed plate and enclosed wiring box.
- Sealed Wipe-Clean Actuator
- Flush Stainless Plate
- Clear Circuit Identification
- Enclosed Rear Terminals
Introducción del producto
This switch presents a sealed rocker, membrane key or touch surface within a stainless cleanroom plate. The broad flange closes the wall opening and the rear box contains terminals away from the room cavity. Laser-etched function labels and a small status indicator can be incorporated without applied paper labels or projecting pilot devices.
Características clave
The flush plate aligns with modular wall panels for direct wiping.
Permanent engraving identifies the controlled lighting zone.
An optional indicator shows circuit state without a separate wall penetration.
The enclosed rear mechanism protects terminal screws from cleaning moisture.
Preocupaciones del producto del cliente
A wall switch is touched frequently and must remain readable, sealed and operable with cleanroom gloves.
Narrow rocker gaps accumulate skin oils and disinfectant.A continuous membrane or sealed actuator removes the open perimeter slot.
Printed adhesive labels peel after chemical cleaning.Laser engraving provides permanent circuit identification.
Small switches are difficult to operate through gloves.A broad tactile actuator provides a clear positive response.
Cleaning fluid reaches exposed rear terminals.A sealed rear box and gland enclose the wiring connection.
Aplicaciones típicas
Local cleanroom lighting switchingAirlock local switchingLaboratory task-light circuitsMaintenance override points
Parámetros técnicos
Typical configurable construction ranges for a cleanroom light switch are listed below.
| Materiales Core | Stainless front plate with sealed polymer membrane or rocker, switch mechanism and enclosed steel back box |
|---|---|
| Panel de espesor | 1.5-3.0 mm room-side plate thickness |
| Ancho efectivo | 86-200 mm front-plate width |
| Longitud máxima | Up to 260 mm plate height for multi-control layouts |
| Acero frente a espesor | 1.5-3.0 mm SUS304 or SUS316L front plate |
| Densidad Core | Approximately 7900-8000 kg/m³ for the stainless front plate |
| Conductividad térmica | 14-16 W/(m·K) for the stainless plate |
| Superficie acabada | Fine-brushed stainless or white coated face with engraved legends and colored indicator |
| Tipo conjunto | Flush plate with concealed gasket, sealed actuator and gland-connected rear switch box |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single or multi-gang controlMembrane, rocker or capacitive touchIlluminated status indicatorMomentary or maintained contact
Planning a Cleanroom Light Switch specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
