İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Sınıf I Biyolojik Güvenlik Kabinesi
An open-front ventilated cabinet that draws room air inward and filters the exhaust to protect personnel and the environment, but not the handled product.
- Inward Face Airflow
- HEPA-Filtered Exhaust
- Personnel and Environmental Protection
- Open-Front Access
Ürün tanıtımı
A Class I cabinet uses inward airflow through the front opening to keep aerosols and particles moving away from the operator. The contaminated air passes through an exhaust HEPA filter before discharge to the room or building exhaust system. Because unfiltered room air crosses the work surface, the cabinet does not protect the product from ambient contamination. The sash, inflow monitor and exhaust connection are configured for the intended laboratory use and installation.
Ana Özellikler
The exhaust HEPA stage retains particulate contamination before air discharge.
A sloped viewing sash improves visibility while limiting the working opening.
A removable work tray exposes the lower catch pan for cleaning.
Airflow and sash alarms warn when the designed access condition is disturbed.
Müşteri Ürün Sorunları
The cabinet must protect the operator without being misrepresented as a sterile product-protection device.
Aerosols move toward the operator at an open laboratory bench.Inward face airflow carries them into the filtered cabinet exhaust path.
Users expect the cabinet to keep samples sterile.Clear application guidance states that room air crosses the work surface and product protection is not provided.
A raised sash weakens capture at the opening.A sash-position alarm identifies operation outside the selected access height.
Debris accumulates beneath a fixed work pan.Lift-out work sections expose the stainless lower collection area.
Tipik uygulamalar
Aerosol-generating laboratory procedures not requiring sterile product protectionAnimal bedding disposalSample opening under inward captureEquipment enclosure with filtered exhaust
Teknik parametreler
Typical configurable construction ranges for a Class I biological safety cabinet are listed below.
| Temel malzemeler | SUS304 work-zone liner with powder-coated steel outer shell and mineral-wool acoustic exhaust enclosure |
|---|---|
| Panel kalınlığı | 30-50 mm double-skin cabinet and exhaust sections |
| Effective Width (Etkili Genişlik) | 900-1800 mm clear working width |
| Maksimum uzunluk | Up to 2200 mm overall cabinet height |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm SUS304 work-zone liner; 0.8-1.2 mm outer steel |
| Core Density (Çekirdek Yoğunluğu) | 80-120 kg / m3 mineral-yün akustik dolgu |
| Termal İletkenlik | Akustik dolgu için 0,035-0,045 W/(m·K) |
| Yüzey bitirme | Brushed SUS304 work zone with low-sheen white powder-coated exterior |
| Ortak tip | Welded inner liner with gasketed exhaust-filter housing and adjustable sash tracks |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Room exhaust or hard-duct connectionManual or motorized sashStainless or coated-steel exteriorService taps and electrical outlets
Planning a Class I Biological Safety Cabinet specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
