Class I biological safety cabinet with open front and exhaust housing

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

Class I 생물학적 안전 캐비닛

An open-front ventilated cabinet that draws room air inward and filters the exhaust to protect personnel and the environment, but not the handled product.

Inward Face Airflow
HEPA-Filtered Exhaust
Personnel and Environmental Protection
Open-Front Access

견적 요청 제품 찾아보기

상품 소개

A Class I cabinet uses inward airflow through the front opening to keep aerosols and particles moving away from the operator. The contaminated air passes through an exhaust HEPA filter before discharge to the room or building exhaust system. Because unfiltered room air crosses the work surface, the cabinet does not protect the product from ambient contamination. The sash, inflow monitor and exhaust connection are configured for the intended laboratory use and installation.

주요 기능

Continuous inward airflow forms the primary operator-protection boundary.

The exhaust HEPA stage retains particulate contamination before air discharge.

A sloped viewing sash improves visibility while limiting the working opening.

A removable work tray exposes the lower catch pan for cleaning.

Airflow and sash alarms warn when the designed access condition is disturbed.

고객 제품 관심사

The cabinet must protect the operator without being misrepresented as a sterile product-protection device.

Aerosols move toward the operator at an open laboratory bench.Inward face airflow carries them into the filtered cabinet exhaust path.

Users expect the cabinet to keep samples sterile.Clear application guidance states that room air crosses the work surface and product protection is not provided.

A raised sash weakens capture at the opening.A sash-position alarm identifies operation outside the selected access height.

Debris accumulates beneath a fixed work pan.Lift-out work sections expose the stainless lower collection area.

일반적인 응용 프로그램

Aerosol-generating laboratory procedures not requiring sterile product protectionAnimal bedding disposalSample opening under inward captureEquipment enclosure with filtered exhaust

기술 매개변수

Typical configurable construction ranges for a Class I biological safety cabinet are listed below.

핵심 재료	SUS304 work-zone liner with powder-coated steel outer shell and mineral-wool acoustic exhaust enclosure
패널 두께	30-50 mm double-skin cabinet and exhaust sections
유효 폭	900 - 1800 mm 명확한 작업 폭
최대 길이	전체 캐비닛 높이 최대 2200 mm
강철 면면 두께	1.0-1.5 mm SUS304 work-zone liner; 0.8-1.2 mm outer steel
코어 밀도	80 - 120 kg / m 3 미네랄 울 음향 충전
열전도도 (Thermal Conductivity)	0. 035 - 0. 045 W / (m · K) 음향 채우기
표면 마무리	Brushed SUS304 work zone with low-sheen white powder-coated exterior
접합 유형	Welded inner liner with gasketed exhaust-filter housing and adjustable sash tracks
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Room exhaust or hard-duct connectionManual or motorized sashStainless or coated-steel exteriorService taps and electrical outlets

Planning a Class I Biological Safety Cabinet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.