English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Стенные и потолочные системы для чистых комнат
Панель доступа к потолку в чистой комнате
A flush, gasketed metal ceiling hatch that gives maintenance teams controlled access to HVAC, electrical and utility spaces above sealed cleanroom ceilings.
- Flush Ceiling Face
- Full Perimeter Gasket
- Concealed Hinges
- Removable Service Door
Введение продукции
Cleanroom Ceiling Access Panels provide a permanent service opening through sealed modular or framed ceilings. A flush metal door closes against a continuous rubber gasket, while concealed hinges and a push catch or hidden lock keep hardware away from the exposed room face. The leaf can be removed for larger maintenance tasks and is retained by a rigid frame that preserves the ceiling opening. Powder-coated galvanized steel suits general interiors, with antibacterial coating, plastic-coated steel or stainless steel available for demanding cleaning areas.
Основные характеристики
A continuous perimeter gasket limits air leakage around the closed ceiling opening.
Concealed hinges and latches keep routine cleaning surfaces simple and unobstructed.
Removable leaves increase the usable service opening when equipment must pass through.
Single- and double-door arrangements cover compact inspection points and larger maintenance zones.
Обеспокоенность клиентов продуктами
Ceiling hatches must give sufficient maintenance access without sagging, leaking air or creating exposed hardware over a controlled room.
A conventional hatch leaves an irregular gap that leaks conditioned air into the plenum.A rigid frame and full rubber gasket maintain a constant sealed perimeter when the door is closed.
Visible hinges and latches create difficult overhead cleaning points.Concealed hardware keeps the cleanroom-facing metal tray smooth.
A small fixed leaf obstructs tools and replacement components during service.The removable door releases from the concealed hinge system to expose the full framed opening.
Thin ceiling doors can distort and fall out of alignment.A reinforced metal tray and stable frame hold the gasket compression evenly around the opening.
Типичные приложения
HEPA terminal maintenance accessCeiling valve and damper inspectionElectrical junction accessCleanroom ceiling plenum entryLaboratory utility service access
Технические параметры
Typical flush metal ceiling access-panel dimensions and construction are listed below.
| Основной материал | Flush galvanized-steel door tray and steel perimeter frame |
|---|---|
| Толщина панели | Approximately 86 mm overall frame depth |
| эффективная ширина | 200–600 mm clear single-leaf width |
| Максимальная длина | 1200 mm leaf height |
| Толщина линий стали | 0.9 mm door tray and 1.2 mm frame |
| Плотность ядра | N/A — hollow reinforced metal access door |
| Теплопроводимость | N/A — uninsulated service access panel |
| Поверхностная отделка | White powder coat, antibacterial coating, plastic-coated steel or stainless steel |
| Объединенный тип | Flush concealed-hinge door with full perimeter rubber gasket and hidden latch |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
300 × 300 to 600 × 1200 mm sizesSingle or double doorPush catch or key lockAntibacterial or stainless steel finish
Planning a Cleanroom Ceiling Access Panel specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
