Complete flush cleanroom ceiling access panel

클린룸 벽 및 천장 시스템

클린룸 천장 액세스 패널

A flush, gasketed metal ceiling hatch that gives maintenance teams controlled access to HVAC, electrical and utility spaces above sealed cleanroom ceilings.

Flush Ceiling Face
Full Perimeter Gasket
Concealed Hinges
Removable Service Door

견적 요청 제품 찾아보기

상품 소개

Cleanroom Ceiling Access Panels provide a permanent service opening through sealed modular or framed ceilings. A flush metal door closes against a continuous rubber gasket, while concealed hinges and a push catch or hidden lock keep hardware away from the exposed room face. The leaf can be removed for larger maintenance tasks and is retained by a rigid frame that preserves the ceiling opening. Powder-coated galvanized steel suits general interiors, with antibacterial coating, plastic-coated steel or stainless steel available for demanding cleaning areas.

주요 기능

A flush door face avoids the projecting lip and exposed hinge knuckles of a general-purpose hatch.

A continuous perimeter gasket limits air leakage around the closed ceiling opening.

Concealed hinges and latches keep routine cleaning surfaces simple and unobstructed.

Removable leaves increase the usable service opening when equipment must pass through.

Single- and double-door arrangements cover compact inspection points and larger maintenance zones.

고객 제품 관심사

Ceiling hatches must give sufficient maintenance access without sagging, leaking air or creating exposed hardware over a controlled room.

A conventional hatch leaves an irregular gap that leaks conditioned air into the plenum.A rigid frame and full rubber gasket maintain a constant sealed perimeter when the door is closed.

Visible hinges and latches create difficult overhead cleaning points.Concealed hardware keeps the cleanroom-facing metal tray smooth.

A small fixed leaf obstructs tools and replacement components during service.The removable door releases from the concealed hinge system to expose the full framed opening.

Thin ceiling doors can distort and fall out of alignment.A reinforced metal tray and stable frame hold the gasket compression evenly around the opening.

일반적인 응용 프로그램

HEPA terminal maintenance accessCeiling valve and damper inspectionElectrical junction accessCleanroom ceiling plenum entryLaboratory utility service access

기술 매개변수

Typical flush metal ceiling access-panel dimensions and construction are listed below.

핵심 재료	Flush galvanized-steel door tray and steel perimeter frame
패널 두께	Approximately 86 mm overall frame depth
유효 폭	200–600 mm clear single-leaf width
최대 길이	1200 mm leaf height
강철 면면 두께	0.9 mm door tray and 1.2 mm frame
코어 밀도	N/A — hollow reinforced metal access door
열전도도 (Thermal Conductivity)	N/A — uninsulated service access panel
표면 마무리	White powder coat, antibacterial coating, plastic-coated steel or stainless steel
접합 유형	Flush concealed-hinge door with full perimeter rubber gasket and hidden latch
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

300 × 300 to 600 × 1200 mm sizesSingle or double doorPush catch or key lockAntibacterial or stainless steel finish

Planning a Cleanroom Ceiling Access Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.