Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Panel de acceso al techo limpio
A flush, gasketed metal ceiling hatch that gives maintenance teams controlled access to HVAC, electrical and utility spaces above sealed cleanroom ceilings.
- Flush Ceiling Face
- Full Perimeter Gasket
- Concealed Hinges
- Removable Service Door
Introducción del producto
Cleanroom Ceiling Access Panels provide a permanent service opening through sealed modular or framed ceilings. A flush metal door closes against a continuous rubber gasket, while concealed hinges and a push catch or hidden lock keep hardware away from the exposed room face. The leaf can be removed for larger maintenance tasks and is retained by a rigid frame that preserves the ceiling opening. Powder-coated galvanized steel suits general interiors, with antibacterial coating, plastic-coated steel or stainless steel available for demanding cleaning areas.
Características clave
A continuous perimeter gasket limits air leakage around the closed ceiling opening.
Concealed hinges and latches keep routine cleaning surfaces simple and unobstructed.
Removable leaves increase the usable service opening when equipment must pass through.
Single- and double-door arrangements cover compact inspection points and larger maintenance zones.
Preocupaciones del producto del cliente
Ceiling hatches must give sufficient maintenance access without sagging, leaking air or creating exposed hardware over a controlled room.
A conventional hatch leaves an irregular gap that leaks conditioned air into the plenum.A rigid frame and full rubber gasket maintain a constant sealed perimeter when the door is closed.
Visible hinges and latches create difficult overhead cleaning points.Concealed hardware keeps the cleanroom-facing metal tray smooth.
A small fixed leaf obstructs tools and replacement components during service.The removable door releases from the concealed hinge system to expose the full framed opening.
Thin ceiling doors can distort and fall out of alignment.A reinforced metal tray and stable frame hold the gasket compression evenly around the opening.
Aplicaciones típicas
HEPA terminal maintenance accessCeiling valve and damper inspectionElectrical junction accessCleanroom ceiling plenum entryLaboratory utility service access
Parámetros técnicos
Typical flush metal ceiling access-panel dimensions and construction are listed below.
| Materiales Core | Flush galvanized-steel door tray and steel perimeter frame |
|---|---|
| Panel de espesor | Approximately 86 mm overall frame depth |
| Ancho efectivo | 200–600 mm clear single-leaf width |
| Longitud máxima | 1200 mm leaf height |
| Acero frente a espesor | 0.9 mm door tray and 1.2 mm frame |
| Densidad Core | N/A — hollow reinforced metal access door |
| Conductividad térmica | N/A — uninsulated service access panel |
| Superficie acabada | White powder coat, antibacterial coating, plastic-coated steel or stainless steel |
| Tipo conjunto | Flush concealed-hinge door with full perimeter rubber gasket and hidden latch |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
300 × 300 to 600 × 1200 mm sizesSingle or double doorPush catch or key lockAntibacterial or stainless steel finish
Planning a Cleanroom Ceiling Access Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
