Complete flush cleanroom ceiling access panel

Sistem Dinding dan Langit-langit Cleanroom

Panel Akses Langit-langit Cleanroom

A flush, gasketed metal ceiling hatch that gives maintenance teams controlled access to HVAC, electrical and utility spaces above sealed cleanroom ceilings.

Flush Ceiling Face
Full Perimeter Gasket
Concealed Hinges
Removable Service Door

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Cleanroom Ceiling Access Panels provide a permanent service opening through sealed modular or framed ceilings. A flush metal door closes against a continuous rubber gasket, while concealed hinges and a push catch or hidden lock keep hardware away from the exposed room face. The leaf can be removed for larger maintenance tasks and is retained by a rigid frame that preserves the ceiling opening. Powder-coated galvanized steel suits general interiors, with antibacterial coating, plastic-coated steel or stainless steel available for demanding cleaning areas.

Fitur utama:

A flush door face avoids the projecting lip and exposed hinge knuckles of a general-purpose hatch.

A continuous perimeter gasket limits air leakage around the closed ceiling opening.

Concealed hinges and latches keep routine cleaning surfaces simple and unobstructed.

Removable leaves increase the usable service opening when equipment must pass through.

Single- and double-door arrangements cover compact inspection points and larger maintenance zones.

Kekhawatiran produk pelanggan

Ceiling hatches must give sufficient maintenance access without sagging, leaking air or creating exposed hardware over a controlled room.

A conventional hatch leaves an irregular gap that leaks conditioned air into the plenum.A rigid frame and full rubber gasket maintain a constant sealed perimeter when the door is closed.

Visible hinges and latches create difficult overhead cleaning points.Concealed hardware keeps the cleanroom-facing metal tray smooth.

A small fixed leaf obstructs tools and replacement components during service.The removable door releases from the concealed hinge system to expose the full framed opening.

Thin ceiling doors can distort and fall out of alignment.A reinforced metal tray and stable frame hold the gasket compression evenly around the opening.

Aplikasi yang Tipis

HEPA terminal maintenance accessCeiling valve and damper inspectionElectrical junction accessCleanroom ceiling plenum entryLaboratory utility service access

Parameter teknis

Typical flush metal ceiling access-panel dimensions and construction are listed below.

Bahan inti	Flush galvanized-steel door tray and steel perimeter frame
Ketebalan Panel (Panel Thickness)	Approximately 86 mm overall frame depth
Efektif lebar	200–600 mm clear single-leaf width
Panjang maksimum	1200 mm leaf height
Baja menghadap ketebalan	0.9 mm door tray and 1.2 mm frame
Kepadatan inti (core density)	N/A — hollow reinforced metal access door
Konduktivitas Termal (Thermal Conductivity)	N/A — uninsulated service access panel
Permukaan selesai	White powder coat, antibacterial coating, plastic-coated steel or stainless steel
Jenis Bersama	Flush concealed-hinge door with full perimeter rubber gasket and hidden latch
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

300 × 300 to 600 × 1200 mm sizesSingle or double doorPush catch or key lockAntibacterial or stainless steel finish

Planning a Cleanroom Ceiling Access Panel specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami