Complete flush cleanroom ceiling access panel

Dinding bilik bersih dan sistem siling

Panel Akses Siling Bilik Bersih

A flush, gasketed metal ceiling hatch that gives maintenance teams controlled access to HVAC, electrical and utility spaces above sealed cleanroom ceilings.

Flush Ceiling Face
Full Perimeter Gasket
Concealed Hinges
Removable Service Door

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Cleanroom Ceiling Access Panels provide a permanent service opening through sealed modular or framed ceilings. A flush metal door closes against a continuous rubber gasket, while concealed hinges and a push catch or hidden lock keep hardware away from the exposed room face. The leaf can be removed for larger maintenance tasks and is retained by a rigid frame that preserves the ceiling opening. Powder-coated galvanized steel suits general interiors, with antibacterial coating, plastic-coated steel or stainless steel available for demanding cleaning areas.

Ciri-ciri Utama

A flush door face avoids the projecting lip and exposed hinge knuckles of a general-purpose hatch.

A continuous perimeter gasket limits air leakage around the closed ceiling opening.

Concealed hinges and latches keep routine cleaning surfaces simple and unobstructed.

Removable leaves increase the usable service opening when equipment must pass through.

Single- and double-door arrangements cover compact inspection points and larger maintenance zones.

Kebimbangan Produk Pelanggan

Ceiling hatches must give sufficient maintenance access without sagging, leaking air or creating exposed hardware over a controlled room.

A conventional hatch leaves an irregular gap that leaks conditioned air into the plenum.A rigid frame and full rubber gasket maintain a constant sealed perimeter when the door is closed.

Visible hinges and latches create difficult overhead cleaning points.Concealed hardware keeps the cleanroom-facing metal tray smooth.

A small fixed leaf obstructs tools and replacement components during service.The removable door releases from the concealed hinge system to expose the full framed opening.

Thin ceiling doors can distort and fall out of alignment.A reinforced metal tray and stable frame hold the gasket compression evenly around the opening.

Permohonan yang biasa

HEPA terminal maintenance accessCeiling valve and damper inspectionElectrical junction accessCleanroom ceiling plenum entryLaboratory utility service access

Parameter teknikal

Typical flush metal ceiling access-panel dimensions and construction are listed below.

Bahan Teras	Flush galvanized-steel door tray and steel perimeter frame
Ketebalan Panel	Approximately 86 mm overall frame depth
Lebar berkesan	200–600 mm clear single-leaf width
Panjang maksimum	1200 mm leaf height
Keluli Menghadapi Ketebalan	0.9 mm door tray and 1.2 mm frame
Ketumpatan teras	N/A — hollow reinforced metal access door
Kekonduksian Terma	N/A — uninsulated service access panel
Kemasan permukaan	White powder coat, antibacterial coating, plastic-coated steel or stainless steel
Jenis Bersatu	Flush concealed-hinge door with full perimeter rubber gasket and hidden latch
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

300 × 300 to 600 × 1200 mm sizesSingle or double doorPush catch or key lockAntibacterial or stainless steel finish

Planning a Cleanroom Ceiling Access Panel specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami