Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Instrumentos de ensaio e validação de sala limpa
Anemômetro Vane
A compact 100 mm rotating-vane airflow meter for stable velocity, temperature and calculated volume-flow measurements across cleanroom filters, grilles and diffusers.
- 100 mm vane averages uneven face velocity.
- Reversible head for supply and extract airflow.
- Sweep averaging and direct volume-flow calculation.
Introdução do produto
This vane anemometer combines a reversible large-area impeller head with a handheld digital display. The 100 mm rotor averages uneven flow over a broader sensing area than a point probe, making it useful at filter faces, coils and ventilation openings. Sweep and time-averaging functions help operators document representative velocity or air-volume results.
Características-chave
Large sensing area averages nonuniform velocity across grilles and filters.
Sweep mode consolidates readings while the vane traverses a larger opening.
Entered duct area converts measured velocity into volumetric flow.
Detachable head supports positioning in confined ventilation locations.
Optional articulated extension improves access to overhead diffusers.
Preocupações do produto do cliente
Airflow across filters and large ventilation openings is rarely uniform, so a practical survey tool must average a meaningful area while remaining easy to orient at each test point.
Velocity varies substantially across a large filter or grille face.The 100 mm vane averages a wider local area and sweep mode supports a representative traverse.
Supply and extract openings require measurements in opposite flow directions.A reversible sensing head supports both airflow directions without changing instruments.
Calculating volume flow manually from many velocity readings is inefficient.Stored opening dimensions allow the meter to calculate volume flow directly.
Ceiling outlets are hard to reach while maintaining correct head orientation.An articulated telescopic extension positions the vane square to the outlet from floor level.
Aplicações típicas
Cleanroom terminal-filter face velocity checksSupply and return grille measurementsDiffuser air-volume verificationHeating and cooling coil airflow surveysVentilation testing and balancing
Parâmetros técnicos
The values below describe a typical professional 100 mm vane system; handle, extension and recording functions can be configured for the required test route.
| Material principal | Low-inertia polymer impeller, protective molded vane ring and impact-resistant handheld electronics |
|---|---|
| Painel de espessura | Typically 2.0-3.5 mm for the molded meter and vane-ring walls |
| Largura efetiva | Approximately 100 mm across the active rotating-vane head |
| Comprimento máximo | Approximately 400-1100 mm depending on direct handle or telescopic extension configuration |
| Aço enfrentando espessura | Typically 0.5-1.0 mm for optional stainless telescopic extension sections |
| Densidade Core | Approximately 1050-1200 kg/m³ for the engineered polymer vane assembly |
| Condutividade térmica | Approximately 0.18-0.25 W/(m·K) for the engineered polymer housing |
| Superfície acabado | Black low-glare vane ring with graphite handheld meter and satin extension hardware |
| Tipo conjunto | Detachable keyed vane-head connection with optional articulated telescopic adapter |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Detachable 100 mm vane headArticulated telescopic extensionRectangular or circular flow coneData-logging configurationProtective carrying caseTraceable calibration service
Planning a Vane Anemometer specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
