Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum-Test - und Validierungsinstrumente
Vane Anemometer
A compact 100 mm rotating-vane airflow meter for stable velocity, temperature and calculated volume-flow measurements across cleanroom filters, grilles and diffusers.
- 100 mm vane averages uneven face velocity.
- Reversible head for supply and extract airflow.
- Sweep averaging and direct volume-flow calculation.
Produkteinführung
This vane anemometer combines a reversible large-area impeller head with a handheld digital display. The 100 mm rotor averages uneven flow over a broader sensing area than a point probe, making it useful at filter faces, coils and ventilation openings. Sweep and time-averaging functions help operators document representative velocity or air-volume results.
Key Features
Large sensing area averages nonuniform velocity across grilles and filters.
Sweep mode consolidates readings while the vane traverses a larger opening.
Entered duct area converts measured velocity into volumetric flow.
Detachable head supports positioning in confined ventilation locations.
Optional articulated extension improves access to overhead diffusers.
Kunden Produktbedenken
Airflow across filters and large ventilation openings is rarely uniform, so a practical survey tool must average a meaningful area while remaining easy to orient at each test point.
Velocity varies substantially across a large filter or grille face.The 100 mm vane averages a wider local area and sweep mode supports a representative traverse.
Supply and extract openings require measurements in opposite flow directions.A reversible sensing head supports both airflow directions without changing instruments.
Calculating volume flow manually from many velocity readings is inefficient.Stored opening dimensions allow the meter to calculate volume flow directly.
Ceiling outlets are hard to reach while maintaining correct head orientation.An articulated telescopic extension positions the vane square to the outlet from floor level.
Typische Anwendungen
Cleanroom terminal-filter face velocity checksSupply and return grille measurementsDiffuser air-volume verificationHeating and cooling coil airflow surveysVentilation testing and balancing
Technische Parameter
The values below describe a typical professional 100 mm vane system; handle, extension and recording functions can be configured for the required test route.
| Core Material | Low-inertia polymer impeller, protective molded vane ring and impact-resistant handheld electronics |
|---|---|
| Panel Dicke | Typically 2.0-3.5 mm for the molded meter and vane-ring walls |
| Effektive Breite | Approximately 100 mm across the active rotating-vane head |
| Maximale Länge | Approximately 400-1100 mm depending on direct handle or telescopic extension configuration |
| Stahl facing Dicke | Typically 0.5-1.0 mm for optional stainless telescopic extension sections |
| Kerndichte | Approximately 1050-1200 kg/m³ for the engineered polymer vane assembly |
| Thermische Leitfähigkeit | Approximately 0.18-0.25 W/(m·K) for the engineered polymer housing |
| Oberfläche Finish | Black low-glare vane ring with graphite handheld meter and satin extension hardware |
| Gemeinsamer Typ | Detachable keyed vane-head connection with optional articulated telescopic adapter |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Detachable 100 mm vane headArticulated telescopic extensionRectangular or circular flow coneData-logging configurationProtective carrying caseTraceable calibration service
Planning a Vane Anemometer specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
