Instrumen Ujian dan Pengesahan Bilik Bersih

Vane Anemometer

A compact 100 mm rotating-vane airflow meter for stable velocity, temperature and calculated volume-flow measurements across cleanroom filters, grilles and diffusers.

100 mm vane averages uneven face velocity.
Reversible head for supply and extract airflow.
Sweep averaging and direct volume-flow calculation.

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This vane anemometer combines a reversible large-area impeller head with a handheld digital display. The 100 mm rotor averages uneven flow over a broader sensing area than a point probe, making it useful at filter faces, coils and ventilation openings. Sweep and time-averaging functions help operators document representative velocity or air-volume results.

Ciri-ciri Utama

Reversible 100 mm vane head measures supply and extract airflow.

Large sensing area averages nonuniform velocity across grilles and filters.

Sweep mode consolidates readings while the vane traverses a larger opening.

Entered duct area converts measured velocity into volumetric flow.

Detachable head supports positioning in confined ventilation locations.

Optional articulated extension improves access to overhead diffusers.

Kebimbangan Produk Pelanggan

Airflow across filters and large ventilation openings is rarely uniform, so a practical survey tool must average a meaningful area while remaining easy to orient at each test point.

Velocity varies substantially across a large filter or grille face.The 100 mm vane averages a wider local area and sweep mode supports a representative traverse.

Supply and extract openings require measurements in opposite flow directions.A reversible sensing head supports both airflow directions without changing instruments.

Calculating volume flow manually from many velocity readings is inefficient.Stored opening dimensions allow the meter to calculate volume flow directly.

Ceiling outlets are hard to reach while maintaining correct head orientation.An articulated telescopic extension positions the vane square to the outlet from floor level.

Permohonan yang biasa

Cleanroom terminal-filter face velocity checksSupply and return grille measurementsDiffuser air-volume verificationHeating and cooling coil airflow surveysVentilation testing and balancing

Parameter teknikal

The values below describe a typical professional 100 mm vane system; handle, extension and recording functions can be configured for the required test route.

Bahan Teras	Low-inertia polymer impeller, protective molded vane ring and impact-resistant handheld electronics
Ketebalan Panel	Typically 2.0-3.5 mm for the molded meter and vane-ring walls
Lebar berkesan	Approximately 100 mm across the active rotating-vane head
Panjang maksimum	Approximately 400-1100 mm depending on direct handle or telescopic extension configuration
Keluli Menghadapi Ketebalan	Typically 0.5-1.0 mm for optional stainless telescopic extension sections
Ketumpatan teras	Approximately 1050-1200 kg/m³ for the engineered polymer vane assembly
Kekonduksian Terma	Approximately 0.18-0.25 W/(m·K) for the engineered polymer housing
Kemasan permukaan	Black low-glare vane ring with graphite handheld meter and satin extension hardware
Jenis Bersatu	Detachable keyed vane-head connection with optional articulated telescopic adapter
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Detachable 100 mm vane headArticulated telescopic extensionRectangular or circular flow coneData-logging configurationProtective carrying caseTraceable calibration service

Planning a Vane Anemometer specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami