Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Anemómetro Vane
A compact 100 mm rotating-vane airflow meter for stable velocity, temperature and calculated volume-flow measurements across cleanroom filters, grilles and diffusers.
- 100 mm vane averages uneven face velocity.
- Reversible head for supply and extract airflow.
- Sweep averaging and direct volume-flow calculation.
Introducción del producto
This vane anemometer combines a reversible large-area impeller head with a handheld digital display. The 100 mm rotor averages uneven flow over a broader sensing area than a point probe, making it useful at filter faces, coils and ventilation openings. Sweep and time-averaging functions help operators document representative velocity or air-volume results.
Características clave
Large sensing area averages nonuniform velocity across grilles and filters.
Sweep mode consolidates readings while the vane traverses a larger opening.
Entered duct area converts measured velocity into volumetric flow.
Detachable head supports positioning in confined ventilation locations.
Optional articulated extension improves access to overhead diffusers.
Preocupaciones del producto del cliente
Airflow across filters and large ventilation openings is rarely uniform, so a practical survey tool must average a meaningful area while remaining easy to orient at each test point.
Velocity varies substantially across a large filter or grille face.The 100 mm vane averages a wider local area and sweep mode supports a representative traverse.
Supply and extract openings require measurements in opposite flow directions.A reversible sensing head supports both airflow directions without changing instruments.
Calculating volume flow manually from many velocity readings is inefficient.Stored opening dimensions allow the meter to calculate volume flow directly.
Ceiling outlets are hard to reach while maintaining correct head orientation.An articulated telescopic extension positions the vane square to the outlet from floor level.
Aplicaciones típicas
Cleanroom terminal-filter face velocity checksSupply and return grille measurementsDiffuser air-volume verificationHeating and cooling coil airflow surveysVentilation testing and balancing
Parámetros técnicos
The values below describe a typical professional 100 mm vane system; handle, extension and recording functions can be configured for the required test route.
| Materiales Core | Low-inertia polymer impeller, protective molded vane ring and impact-resistant handheld electronics |
|---|---|
| Panel de espesor | Typically 2.0-3.5 mm for the molded meter and vane-ring walls |
| Ancho efectivo | Approximately 100 mm across the active rotating-vane head |
| Longitud máxima | Approximately 400-1100 mm depending on direct handle or telescopic extension configuration |
| Acero frente a espesor | Typically 0.5-1.0 mm for optional stainless telescopic extension sections |
| Densidad Core | Approximately 1050-1200 kg/m³ for the engineered polymer vane assembly |
| Conductividad térmica | Approximately 0.18-0.25 W/(m·K) for the engineered polymer housing |
| Superficie acabada | Black low-glare vane ring with graphite handheld meter and satin extension hardware |
| Tipo conjunto | Detachable keyed vane-head connection with optional articulated telescopic adapter |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Detachable 100 mm vane headArticulated telescopic extensionRectangular or circular flow coneData-logging configurationProtective carrying caseTraceable calibration service
Planning a Vane Anemometer specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
