Vane anemometer with 100 mm head in three-quarter full view

클린룸 테스트 및 검증 장비

베인 기압계

A compact 100 mm rotating-vane airflow meter for stable velocity, temperature and calculated volume-flow measurements across cleanroom filters, grilles and diffusers.

100 mm vane averages uneven face velocity.
Reversible head for supply and extract airflow.
Sweep averaging and direct volume-flow calculation.

견적 요청 제품 찾아보기

상품 소개

This vane anemometer combines a reversible large-area impeller head with a handheld digital display. The 100 mm rotor averages uneven flow over a broader sensing area than a point probe, making it useful at filter faces, coils and ventilation openings. Sweep and time-averaging functions help operators document representative velocity or air-volume results.

주요 기능

Reversible 100 mm vane head measures supply and extract airflow.

Large sensing area averages nonuniform velocity across grilles and filters.

Sweep mode consolidates readings while the vane traverses a larger opening.

Entered duct area converts measured velocity into volumetric flow.

Detachable head supports positioning in confined ventilation locations.

Optional articulated extension improves access to overhead diffusers.

고객 제품 관심사

Airflow across filters and large ventilation openings is rarely uniform, so a practical survey tool must average a meaningful area while remaining easy to orient at each test point.

Velocity varies substantially across a large filter or grille face.The 100 mm vane averages a wider local area and sweep mode supports a representative traverse.

Supply and extract openings require measurements in opposite flow directions.A reversible sensing head supports both airflow directions without changing instruments.

Calculating volume flow manually from many velocity readings is inefficient.Stored opening dimensions allow the meter to calculate volume flow directly.

Ceiling outlets are hard to reach while maintaining correct head orientation.An articulated telescopic extension positions the vane square to the outlet from floor level.

일반적인 응용 프로그램

Cleanroom terminal-filter face velocity checksSupply and return grille measurementsDiffuser air-volume verificationHeating and cooling coil airflow surveysVentilation testing and balancing

기술 매개변수

The values below describe a typical professional 100 mm vane system; handle, extension and recording functions can be configured for the required test route.

핵심 재료	Low-inertia polymer impeller, protective molded vane ring and impact-resistant handheld electronics
패널 두께	Typically 2.0-3.5 mm for the molded meter and vane-ring walls
유효 폭	Approximately 100 mm across the active rotating-vane head
최대 길이	Approximately 400-1100 mm depending on direct handle or telescopic extension configuration
강철 면면 두께	Typically 0.5-1.0 mm for optional stainless telescopic extension sections
코어 밀도	Approximately 1050-1200 kg/m³ for the engineered polymer vane assembly
열전도도 (Thermal Conductivity)	Approximately 0.18-0.25 W/(m·K) for the engineered polymer housing
표면 마무리	Black low-glare vane ring with graphite handheld meter and satin extension hardware
접합 유형	Detachable keyed vane-head connection with optional articulated telescopic adapter
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Detachable 100 mm vane headArticulated telescopic extensionRectangular or circular flow coneData-logging configurationProtective carrying caseTraceable calibration service

Planning a Vane Anemometer specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.