Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Porta de sala limpa dupla folha desigual
A leaf-and-a-half cleanroom doorset combining one full-size daily personnel leaf with a narrower inactive leaf that releases when occasional equipment needs a wider route.
- Full-Size Daily Active Leaf
- Narrow Secondary Access Leaf
- Compact Wide-Opening Solution
- Sealed Asymmetric Meeting Stile
Introdução do produto
The Unequal Double-Leaf Cleanroom Door provides equipment access without making both leaves oversized. The primary leaf operates like a normal single personnel door, while the narrow secondary leaf stays flush-bolted for routine use. Releasing it extends the clear opening for carts, cabinets or production equipment. Aluminum-honeycomb infill keeps the tall unequal leaves light and reduces the load on the asymmetric frame.
Características-chave
A narrow secondary leaf adds width only when a larger load must pass.
Honeycomb construction limits hinge loads on both differently sized leaves.
An asymmetric overlapping seal closes the full central meeting line.
Concealed secondary-leaf bolts keep the everyday opening clear of extra hardware.
Preocupações do produto do cliente
Leaf-and-a-half doors must give convenient daily access while keeping the secondary leaf secure, sealed and immediately available for larger loads.
A full double door consumes wall and swing space despite infrequent wide-access demand.The narrow secondary leaf adds occasional width while preserving a standard active leaf.
Staff release the wrong hardware when the secondary leaf is needed quickly.Accessible concealed flush bolts provide a direct top-and-bottom release sequence.
Differently sized leaves can sag and meet unevenly at the centre.Light honeycomb cores, reinforced hinges and adjustable alignment maintain the asymmetric joint.
The inactive leaf rattles under room pressure changes.Positive flush-bolt engagement and compressible meeting seals restrain the narrow leaf.
Aplicações típicas
Cleanroom personnel routes with occasional equipment transferLaboratory instrument roomsHealthcare equipment accessPackaging areasMaintenance access in compact corridors
Parâmetros técnicos
Typical dimensions for a leaf-and-a-half cleanroom door arrangement are shown below.
| Material principal | Bonded aluminum honeycomb in active and secondary leaves |
|---|---|
| Painel de espessura | 50 mm per door leaf |
| Largura efetiva | 1200-1800 mm total clear opening |
| Comprimento máximo | 2400 mm maximum leaf height |
| Aço enfrentando espessura | 0.8-1.0 mm powder-coated galvanized steel skins |
| Densidade Core | 40-70 kg/m³ aluminum honeycomb |
| Condutividade térmica | 0.06-0.10 W/(m·K) typical honeycomb core range |
| Superfície acabado | Smooth powder-coated steel with matching sealed leaf edges |
| Tipo conjunto | Asymmetric paired leaves with gasketed astragal and concealed secondary-leaf flush bolts |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
300-600 mm secondary leafOne or two vision panelsLeaf coordinatorAutomatic drop seals
Planning a Unequal Double-Leaf Cleanroom Door specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
