Pembekal Satu Henti Anda untuk Peralatan Bilik Bersih dan Kemudahan AseptikSokongan Projek Antarabangsa
Open mobile navigationClose mobile navigation
Pintu Bilik Bersih, Windows dan Sistem Interlock

Pintu Bilik Bersih Double-Leaf yang tidak sama rata

A leaf-and-a-half cleanroom doorset combining one full-size daily personnel leaf with a narrower inactive leaf that releases when occasional equipment needs a wider route.
  • Full-Size Daily Active Leaf
  • Narrow Secondary Access Leaf
  • Compact Wide-Opening Solution
  • Sealed Asymmetric Meeting Stile
Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Unequal Double-Leaf Cleanroom Door provides equipment access without making both leaves oversized. The primary leaf operates like a normal single personnel door, while the narrow secondary leaf stays flush-bolted for routine use. Releasing it extends the clear opening for carts, cabinets or production equipment. Aluminum-honeycomb infill keeps the tall unequal leaves light and reduces the load on the asymmetric frame.

Ciri-ciri Utama

The active leaf retains familiar single-door operation for normal traffic.

A narrow secondary leaf adds width only when a larger load must pass.

Honeycomb construction limits hinge loads on both differently sized leaves.

An asymmetric overlapping seal closes the full central meeting line.

Concealed secondary-leaf bolts keep the everyday opening clear of extra hardware.

Kebimbangan Produk Pelanggan

Leaf-and-a-half doors must give convenient daily access while keeping the secondary leaf secure, sealed and immediately available for larger loads.

A full double door consumes wall and swing space despite infrequent wide-access demand.The narrow secondary leaf adds occasional width while preserving a standard active leaf.
Staff release the wrong hardware when the secondary leaf is needed quickly.Accessible concealed flush bolts provide a direct top-and-bottom release sequence.
Differently sized leaves can sag and meet unevenly at the centre.Light honeycomb cores, reinforced hinges and adjustable alignment maintain the asymmetric joint.
The inactive leaf rattles under room pressure changes.Positive flush-bolt engagement and compressible meeting seals restrain the narrow leaf.

Permohonan yang biasa

Cleanroom personnel routes with occasional equipment transferLaboratory instrument roomsHealthcare equipment accessPackaging areasMaintenance access in compact corridors

Parameter teknikal

Typical dimensions for a leaf-and-a-half cleanroom door arrangement are shown below.

Bahan TerasBonded aluminum honeycomb in active and secondary leaves
Ketebalan Panel50 mm per door leaf
Lebar berkesan1200-1800 mm total clear opening
Panjang maksimum2400 mm maximum leaf height
Keluli Menghadapi Ketebalan0.8-1.0 mm powder-coated galvanized steel skins
Ketumpatan teras40-70 kg/m³ aluminum honeycomb
Kekonduksian Terma0.06-0.10 W/(m·K) typical honeycomb core range
Kemasan permukaanSmooth powder-coated steel with matching sealed leaf edges
Jenis BersatuAsymmetric paired leaves with gasketed astragal and concealed secondary-leaf flush bolts
PenyesuaianTerdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

300-600 mm secondary leafOne or two vision panelsLeaf coordinatorAutomatic drop seals

Planning a Unequal Double-Leaf Cleanroom Door specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami
Email Kami WhatsApp WeChat

Laman Utama

Produk

Berita

Tentang Kami

Hubungi Kami