Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Pintu Cleanroom, Jendela dan Sistem Interlock
Pintu Cleanroom Double-Leaf yang tidak sama
A leaf-and-a-half cleanroom doorset combining one full-size daily personnel leaf with a narrower inactive leaf that releases when occasional equipment needs a wider route.
- Full-Size Daily Active Leaf
- Narrow Secondary Access Leaf
- Compact Wide-Opening Solution
- Sealed Asymmetric Meeting Stile
Perkenalan produk
The Unequal Double-Leaf Cleanroom Door provides equipment access without making both leaves oversized. The primary leaf operates like a normal single personnel door, while the narrow secondary leaf stays flush-bolted for routine use. Releasing it extends the clear opening for carts, cabinets or production equipment. Aluminum-honeycomb infill keeps the tall unequal leaves light and reduces the load on the asymmetric frame.
Fitur utama:
A narrow secondary leaf adds width only when a larger load must pass.
Honeycomb construction limits hinge loads on both differently sized leaves.
An asymmetric overlapping seal closes the full central meeting line.
Concealed secondary-leaf bolts keep the everyday opening clear of extra hardware.
Kekhawatiran produk pelanggan
Leaf-and-a-half doors must give convenient daily access while keeping the secondary leaf secure, sealed and immediately available for larger loads.
A full double door consumes wall and swing space despite infrequent wide-access demand.The narrow secondary leaf adds occasional width while preserving a standard active leaf.
Staff release the wrong hardware when the secondary leaf is needed quickly.Accessible concealed flush bolts provide a direct top-and-bottom release sequence.
Differently sized leaves can sag and meet unevenly at the centre.Light honeycomb cores, reinforced hinges and adjustable alignment maintain the asymmetric joint.
The inactive leaf rattles under room pressure changes.Positive flush-bolt engagement and compressible meeting seals restrain the narrow leaf.
Aplikasi yang Tipis
Cleanroom personnel routes with occasional equipment transferLaboratory instrument roomsHealthcare equipment accessPackaging areasMaintenance access in compact corridors
Parameter teknis
Typical dimensions for a leaf-and-a-half cleanroom door arrangement are shown below.
| Bahan inti | Bonded aluminum honeycomb in active and secondary leaves |
|---|---|
| Ketebalan Panel (Panel Thickness) | 50 mm per door leaf |
| Efektif lebar | 1200-1800 mm total clear opening |
| Panjang maksimum | 2400 mm tinggi daun maksimum |
| Baja menghadap ketebalan | 0.8-1.0 mm powder-coated galvanized steel skins |
| Kepadatan inti (core density) | 40-70 kg/m³ aluminum honeycomb |
| Konduktivitas Termal (Thermal Conductivity) | 0.06-0.10 W/(m·K) typical honeycomb core range |
| Permukaan selesai | Smooth powder-coated steel with matching sealed leaf edges |
| Jenis Bersama | Asymmetric paired leaves with gasketed astragal and concealed secondary-leaf flush bolts |
| Customization (Kustomisasi) | A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan |
Pilihan yang tersedia
300-600 mm secondary leafOne or two vision panelsLeaf coordinatorAutomatic drop seals
Planning a Unequal Double-Leaf Cleanroom Door specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
