Complete unequal double-leaf cleanroom door with narrow secondary leaf

클린룸 도어, 창문 및 인터락 시스템

불균형의 두 잎 클린룸 문

A leaf-and-a-half cleanroom doorset combining one full-size daily personnel leaf with a narrower inactive leaf that releases when occasional equipment needs a wider route.

Full-Size Daily Active Leaf
Narrow Secondary Access Leaf
Compact Wide-Opening Solution
Sealed Asymmetric Meeting Stile

견적 요청 제품 찾아보기

상품 소개

The Unequal Double-Leaf Cleanroom Door provides equipment access without making both leaves oversized. The primary leaf operates like a normal single personnel door, while the narrow secondary leaf stays flush-bolted for routine use. Releasing it extends the clear opening for carts, cabinets or production equipment. Aluminum-honeycomb infill keeps the tall unequal leaves light and reduces the load on the asymmetric frame.

주요 기능

The active leaf retains familiar single-door operation for normal traffic.

A narrow secondary leaf adds width only when a larger load must pass.

Honeycomb construction limits hinge loads on both differently sized leaves.

An asymmetric overlapping seal closes the full central meeting line.

Concealed secondary-leaf bolts keep the everyday opening clear of extra hardware.

고객 제품 관심사

Leaf-and-a-half doors must give convenient daily access while keeping the secondary leaf secure, sealed and immediately available for larger loads.

A full double door consumes wall and swing space despite infrequent wide-access demand.The narrow secondary leaf adds occasional width while preserving a standard active leaf.

Staff release the wrong hardware when the secondary leaf is needed quickly.Accessible concealed flush bolts provide a direct top-and-bottom release sequence.

Differently sized leaves can sag and meet unevenly at the centre.Light honeycomb cores, reinforced hinges and adjustable alignment maintain the asymmetric joint.

The inactive leaf rattles under room pressure changes.Positive flush-bolt engagement and compressible meeting seals restrain the narrow leaf.

일반적인 응용 프로그램

Cleanroom personnel routes with occasional equipment transferLaboratory instrument roomsHealthcare equipment accessPackaging areasMaintenance access in compact corridors

기술 매개변수

Typical dimensions for a leaf-and-a-half cleanroom door arrangement are shown below.

핵심 재료	Bonded aluminum honeycomb in active and secondary leaves
패널 두께	50 mm per door leaf
유효 폭	1200-1800 mm total clear opening
최대 길이	2400 mm maximum leaf height
강철 면면 두께	0.8-1.0 mm powder-coated galvanized steel skins
코어 밀도	40-70 kg/m³ aluminum honeycomb
열전도도 (Thermal Conductivity)	0.06-0.10 W/(m·K) typical honeycomb core range
표면 마무리	Smooth powder-coated steel with matching sealed leaf edges
접합 유형	Asymmetric paired leaves with gasketed astragal and concealed secondary-leaf flush bolts
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

300-600 mm secondary leafOne or two vision panelsLeaf coordinatorAutomatic drop seals

Planning a Unequal Double-Leaf Cleanroom Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.