Complete unequal double-leaf cleanroom door with narrow secondary leaf

クリーンルームのドア、窓およびインターロックシステム

Unequal の二重葉クリーンルームのドア

A leaf-and-a-half cleanroom doorset combining one full-size daily personnel leaf with a narrower inactive leaf that releases when occasional equipment needs a wider route.

Full-Size Daily Active Leaf
Narrow Secondary Access Leaf
Compact Wide-Opening Solution
Sealed Asymmetric Meeting Stile

見積もりリクエスト製品案内

商品紹介

The Unequal Double-Leaf Cleanroom Door provides equipment access without making both leaves oversized. The primary leaf operates like a normal single personnel door, while the narrow secondary leaf stays flush-bolted for routine use. Releasing it extends the clear opening for carts, cabinets or production equipment. Aluminum-honeycomb infill keeps the tall unequal leaves light and reduces the load on the asymmetric frame.

主要な特徴

The active leaf retains familiar single-door operation for normal traffic.

A narrow secondary leaf adds width only when a larger load must pass.

Honeycomb construction limits hinge loads on both differently sized leaves.

An asymmetric overlapping seal closes the full central meeting line.

Concealed secondary-leaf bolts keep the everyday opening clear of extra hardware.

お客様の製品に関する懸念事項

Leaf-and-a-half doors must give convenient daily access while keeping the secondary leaf secure, sealed and immediately available for larger loads.

A full double door consumes wall and swing space despite infrequent wide-access demand.The narrow secondary leaf adds occasional width while preserving a standard active leaf.

Staff release the wrong hardware when the secondary leaf is needed quickly.Accessible concealed flush bolts provide a direct top-and-bottom release sequence.

Differently sized leaves can sag and meet unevenly at the centre.Light honeycomb cores, reinforced hinges and adjustable alignment maintain the asymmetric joint.

The inactive leaf rattles under room pressure changes.Positive flush-bolt engagement and compressible meeting seals restrain the narrow leaf.

典型的な用途

Cleanroom personnel routes with occasional equipment transferLaboratory instrument roomsHealthcare equipment accessPackaging areasMaintenance access in compact corridors

技術的なパラメータ

Typical dimensions for a leaf-and-a-half cleanroom door arrangement are shown below.

コア材料	Bonded aluminum honeycomb in active and secondary leaves
パネルの厚さ	50 mm per door leaf
有効幅	1200-1800 mm total clear opening
最大長さ	2400 mm maximum leaf height
鋼鉄の厚さを直面する	0.8-1.0 mm powder-coated galvanized steel skins
コア密度	40-70 kg/m³ aluminum honeycomb
熱伝導率	0.06-0.10 W/(m·K) typical honeycomb core range
表面仕上げ	Smooth powder-coated steel with matching sealed leaf edges
ジョイントタイプ	Asymmetric paired leaves with gasketed astragal and concealed secondary-leaf flush bolts
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

300-600 mm secondary leafOne or two vision panelsLeaf coordinatorAutomatic drop seals

Planning a Unequal Double-Leaf Cleanroom Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する