Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Controle de sala limpa e sistemas de monitoramento ambiental
Z Sensor de Temperatura
A low-profile room sensor using a stable platinum RTD element to measure cleanroom temperature without obstructing routine wall cleaning.
- Platinum RTD Stability
- Low-Profile Clean Housing
- Fast Room-Air Response
- Passive or Active Output
Introdução do produto
The cleanroom temperature sensor houses a platinum resistance element behind protected ventilation slots that expose it to representative room air. A smooth, compact enclosure minimizes horizontal ledges while allowing enough airflow for responsive measurement. Passive resistance outputs connect directly to compatible controllers, while active versions provide standardized voltage, current or digital signals. Remote electronics or sealed terminal arrangements can be selected for areas where regular wipe-down cleaning is required.
Características-chave
Protected ventilation paths balance air response with resistance to casual contact.
A shallow white enclosure reduces visual obstruction and exposed ledges on cleanroom walls.
Passive and active output choices match DDC, PLC and monitoring-system input types.
Preocupações do produto do cliente
A room temperature sensor must sample representative air while avoiding heat from the wall, direct drafts and frequently touched locations.
The sensor reads warmer because its electronics heat the sensing element.Separated low-power electronics and airflow around the RTD reduce self-heating error.
Wall conduction biases the reading after adjacent-space temperature changes.An internal stand-off and ventilated housing reduce direct thermal coupling to the wall.
Cleaning cloths catch on deep vents and protruding parts.A shallow housing with protected side slots keeps the exposed profile simple.
The controller requires a different sensor resistance or signal type.Selectable passive RTD and active transmitter versions support common control inputs.
Aplicações típicas
Pharmaceutical temperature-controlled suitesMedical-device temperature-controlled assembly roomsControlled laboratoriesTemperature-mapped corridors
Parâmetros técnicos
Typical materials and dimensions for a low-profile cleanroom temperature sensor are shown below.
| Material principal | Platinum RTD element in flame-retardant ABS or polycarbonate room housing |
|---|---|
| Painel de espessura | 20-35 mm sensor depth |
| Largura efetiva | 70-100 mm housing width |
| Comprimento máximo | Up to 130 mm housing height |
| Aço enfrentando espessura | 0 mm; non-metallic room enclosure |
| Densidade Core | 1040-1220 kg/m³ for ABS or polycarbonate housing |
| Condutividade térmica | 0.17-0.22 W/(m·K) for polymer housing material |
| Superfície acabado | Smooth matte white housing with discreet side ventilation slots |
| Tipo conjunto | Two-part snap-fit wall housing with rear screw terminal or pluggable connector |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Pt100, Pt1000 or active outputDisplay or blank faceWall or duct mountingAnalog or digital transmitter
Planning a Temperature Sensor specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
