Complete matte-white cleanroom temperature sensor with protected side vents

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

온도 센서

A low-profile room sensor using a stable platinum RTD element to measure cleanroom temperature without obstructing routine wall cleaning.

Platinum RTD Stability
Low-Profile Clean Housing
Fast Room-Air Response
Passive or Active Output

견적 요청 제품 찾아보기

상품 소개

The cleanroom temperature sensor houses a platinum resistance element behind protected ventilation slots that expose it to representative room air. A smooth, compact enclosure minimizes horizontal ledges while allowing enough airflow for responsive measurement. Passive resistance outputs connect directly to compatible controllers, while active versions provide standardized voltage, current or digital signals. Remote electronics or sealed terminal arrangements can be selected for areas where regular wipe-down cleaning is required.

주요 기능

Platinum RTD sensing provides stable, repeatable room-temperature measurement.

Protected ventilation paths balance air response with resistance to casual contact.

A shallow white enclosure reduces visual obstruction and exposed ledges on cleanroom walls.

Passive and active output choices match DDC, PLC and monitoring-system input types.

고객 제품 관심사

A room temperature sensor must sample representative air while avoiding heat from the wall, direct drafts and frequently touched locations.

The sensor reads warmer because its electronics heat the sensing element.Separated low-power electronics and airflow around the RTD reduce self-heating error.

Wall conduction biases the reading after adjacent-space temperature changes.An internal stand-off and ventilated housing reduce direct thermal coupling to the wall.

Cleaning cloths catch on deep vents and protruding parts.A shallow housing with protected side slots keeps the exposed profile simple.

The controller requires a different sensor resistance or signal type.Selectable passive RTD and active transmitter versions support common control inputs.

일반적인 응용 프로그램

Pharmaceutical temperature-controlled suitesMedical-device temperature-controlled assembly rooms통제된 실험실Temperature-mapped corridors

기술 매개변수

Typical materials and dimensions for a low-profile cleanroom temperature sensor are shown below.

핵심 재료	Platinum RTD element in flame-retardant ABS or polycarbonate room housing
패널 두께	20-35 mm sensor depth
유효 폭	70-100 mm housing width
최대 길이	Up to 130 mm housing height
강철 면면 두께	0 mm; non-metallic room enclosure
코어 밀도	1040-1220 kg/m³ for ABS or polycarbonate housing
열전도도 (Thermal Conductivity)	0.17-0.22 W/(m·K) for polymer housing material
표면 마무리	Smooth matte white housing with discreet side ventilation slots
접합 유형	Two-part snap-fit wall housing with rear screw terminal or pluggable connector
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Pt100, Pt1000 or active outputDisplay or blank faceWall or duct mountingAnalog or digital transmitter

Planning a Temperature Sensor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.