İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kontrolü ve Çevre İzleme Sistemleri
Sıcaklık Sensörü
A low-profile room sensor using a stable platinum RTD element to measure cleanroom temperature without obstructing routine wall cleaning.
- Platinum RTD Stability
- Low-Profile Clean Housing
- Fast Room-Air Response
- Passive or Active Output
Ürün tanıtımı
The cleanroom temperature sensor houses a platinum resistance element behind protected ventilation slots that expose it to representative room air. A smooth, compact enclosure minimizes horizontal ledges while allowing enough airflow for responsive measurement. Passive resistance outputs connect directly to compatible controllers, while active versions provide standardized voltage, current or digital signals. Remote electronics or sealed terminal arrangements can be selected for areas where regular wipe-down cleaning is required.
Ana Özellikler
Protected ventilation paths balance air response with resistance to casual contact.
A shallow white enclosure reduces visual obstruction and exposed ledges on cleanroom walls.
Passive and active output choices match DDC, PLC and monitoring-system input types.
Müşteri Ürün Sorunları
A room temperature sensor must sample representative air while avoiding heat from the wall, direct drafts and frequently touched locations.
The sensor reads warmer because its electronics heat the sensing element.Separated low-power electronics and airflow around the RTD reduce self-heating error.
Wall conduction biases the reading after adjacent-space temperature changes.An internal stand-off and ventilated housing reduce direct thermal coupling to the wall.
Cleaning cloths catch on deep vents and protruding parts.A shallow housing with protected side slots keeps the exposed profile simple.
The controller requires a different sensor resistance or signal type.Selectable passive RTD and active transmitter versions support common control inputs.
Tipik uygulamalar
Pharmaceutical temperature-controlled suitesMedical-device temperature-controlled assembly roomsControlled laboratoriesTemperature-mapped corridors
Teknik parametreler
Typical materials and dimensions for a low-profile cleanroom temperature sensor are shown below.
| Temel malzemeler | Platinum RTD element in flame-retardant ABS or polycarbonate room housing |
|---|---|
| Panel kalınlığı | 20-35 mm sensor depth |
| Effective Width (Etkili Genişlik) | 70-100 mm housing width |
| Maksimum uzunluk | Up to 130 mm housing height |
| Çelik yüz yüze kalınlığı | 0 mm; non-metallic room enclosure |
| Core Density (Çekirdek Yoğunluğu) | 1040-1220 kg/m³ for ABS or polycarbonate housing |
| Termal İletkenlik | 0.17-0.22 W/(m·K) for polymer housing material |
| Yüzey bitirme | Smooth matte white housing with discreet side ventilation slots |
| Ortak tip | Two-part snap-fit wall housing with rear screw terminal or pluggable connector |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Pt100, Pt1000 or active outputDisplay or blank faceWall or duct mountingAnalog or digital transmitter
Planning a Temperature Sensor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
