Complete matte-white cleanroom temperature sensor with protected side vents

クリーンルーム管理 · 環境モニタリングシステム

Temperature センサー

A low-profile room sensor using a stable platinum RTD element to measure cleanroom temperature without obstructing routine wall cleaning.

Platinum RTD Stability
Low-Profile Clean Housing
Fast Room-Air Response
Passive or Active Output

見積もりリクエスト製品案内

商品紹介

The cleanroom temperature sensor houses a platinum resistance element behind protected ventilation slots that expose it to representative room air. A smooth, compact enclosure minimizes horizontal ledges while allowing enough airflow for responsive measurement. Passive resistance outputs connect directly to compatible controllers, while active versions provide standardized voltage, current or digital signals. Remote electronics or sealed terminal arrangements can be selected for areas where regular wipe-down cleaning is required.

主要な特徴

Platinum RTD sensing provides stable, repeatable room-temperature measurement.

Protected ventilation paths balance air response with resistance to casual contact.

A shallow white enclosure reduces visual obstruction and exposed ledges on cleanroom walls.

Passive and active output choices match DDC, PLC and monitoring-system input types.

お客様の製品に関する懸念事項

A room temperature sensor must sample representative air while avoiding heat from the wall, direct drafts and frequently touched locations.

The sensor reads warmer because its electronics heat the sensing element.Separated low-power electronics and airflow around the RTD reduce self-heating error.

Wall conduction biases the reading after adjacent-space temperature changes.An internal stand-off and ventilated housing reduce direct thermal coupling to the wall.

Cleaning cloths catch on deep vents and protruding parts.A shallow housing with protected side slots keeps the exposed profile simple.

The controller requires a different sensor resistance or signal type.Selectable passive RTD and active transmitter versions support common control inputs.

典型的な用途

Pharmaceutical temperature-controlled suitesMedical-device temperature-controlled assembly rooms管理研究室Temperature-mapped corridors

技術的なパラメータ

Typical materials and dimensions for a low-profile cleanroom temperature sensor are shown below.

コア材料	Platinum RTD element in flame-retardant ABS or polycarbonate room housing
パネルの厚さ	20-35 mm sensor depth
有効幅	70-100 mm housing width
最大長さ	Up to 130 mm housing height
鋼鉄の厚さを直面する	0 mm; non-metallic room enclosure
コア密度	1040-1220 kg/m³ for ABS or polycarbonate housing
熱伝導率	0.17-0.22 W/(m·K) for polymer housing material
表面仕上げ	Smooth matte white housing with discreet side ventilation slots
ジョイントタイプ	Two-part snap-fit wall housing with rear screw terminal or pluggable connector
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Pt100, Pt1000 or active outputDisplay or blank faceWall or duct mountingAnalog or digital transmitter

Planning a Temperature Sensor specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する