English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы контроля за чистыми помещениями и экологического мониторинга
Датчик температуры
A low-profile room sensor using a stable platinum RTD element to measure cleanroom temperature without obstructing routine wall cleaning.
- Platinum RTD Stability
- Low-Profile Clean Housing
- Fast Room-Air Response
- Passive or Active Output
Введение продукции
The cleanroom temperature sensor houses a platinum resistance element behind protected ventilation slots that expose it to representative room air. A smooth, compact enclosure minimizes horizontal ledges while allowing enough airflow for responsive measurement. Passive resistance outputs connect directly to compatible controllers, while active versions provide standardized voltage, current or digital signals. Remote electronics or sealed terminal arrangements can be selected for areas where regular wipe-down cleaning is required.
Основные характеристики
Protected ventilation paths balance air response with resistance to casual contact.
A shallow white enclosure reduces visual obstruction and exposed ledges on cleanroom walls.
Passive and active output choices match DDC, PLC and monitoring-system input types.
Обеспокоенность клиентов продуктами
A room temperature sensor must sample representative air while avoiding heat from the wall, direct drafts and frequently touched locations.
The sensor reads warmer because its electronics heat the sensing element.Separated low-power electronics and airflow around the RTD reduce self-heating error.
Wall conduction biases the reading after adjacent-space temperature changes.An internal stand-off and ventilated housing reduce direct thermal coupling to the wall.
Cleaning cloths catch on deep vents and protruding parts.A shallow housing with protected side slots keeps the exposed profile simple.
The controller requires a different sensor resistance or signal type.Selectable passive RTD and active transmitter versions support common control inputs.
Типичные приложения
Pharmaceutical temperature-controlled suitesMedical-device temperature-controlled assembly roomsControlled laboratoriesTemperature-mapped corridors
Технические параметры
Typical materials and dimensions for a low-profile cleanroom temperature sensor are shown below.
| Основной материал | Platinum RTD element in flame-retardant ABS or polycarbonate room housing |
|---|---|
| Толщина панели | 20-35 mm sensor depth |
| эффективная ширина | 70-100 mm housing width |
| Максимальная длина | Up to 130 mm housing height |
| Толщина линий стали | 0 mm; non-metallic room enclosure |
| Плотность ядра | 1040-1220 kg/m³ for ABS or polycarbonate housing |
| Теплопроводимость | 0.17-0.22 W/(m·K) for polymer housing material |
| Поверхностная отделка | Smooth matte white housing with discreet side ventilation slots |
| Объединенный тип | Two-part snap-fit wall housing with rear screw terminal or pluggable connector |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Pt100, Pt1000 or active outputDisplay or blank faceWall or duct mountingAnalog or digital transmitter
Planning a Temperature Sensor specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
