Complete matte-white cleanroom temperature sensor with protected side vents

Kontrol Cleanroom dan Sistem Pemantauan Lingkungan

Sensor Suhu (Temperature Sensor)

A low-profile room sensor using a stable platinum RTD element to measure cleanroom temperature without obstructing routine wall cleaning.

Platinum RTD Stability
Low-Profile Clean Housing
Fast Room-Air Response
Passive or Active Output

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The cleanroom temperature sensor houses a platinum resistance element behind protected ventilation slots that expose it to representative room air. A smooth, compact enclosure minimizes horizontal ledges while allowing enough airflow for responsive measurement. Passive resistance outputs connect directly to compatible controllers, while active versions provide standardized voltage, current or digital signals. Remote electronics or sealed terminal arrangements can be selected for areas where regular wipe-down cleaning is required.

Fitur utama:

Platinum RTD sensing provides stable, repeatable room-temperature measurement.

Protected ventilation paths balance air response with resistance to casual contact.

A shallow white enclosure reduces visual obstruction and exposed ledges on cleanroom walls.

Passive and active output choices match DDC, PLC and monitoring-system input types.

Kekhawatiran produk pelanggan

A room temperature sensor must sample representative air while avoiding heat from the wall, direct drafts and frequently touched locations.

The sensor reads warmer because its electronics heat the sensing element.Separated low-power electronics and airflow around the RTD reduce self-heating error.

Wall conduction biases the reading after adjacent-space temperature changes.An internal stand-off and ventilated housing reduce direct thermal coupling to the wall.

Cleaning cloths catch on deep vents and protruding parts.A shallow housing with protected side slots keeps the exposed profile simple.

The controller requires a different sensor resistance or signal type.Selectable passive RTD and active transmitter versions support common control inputs.

Aplikasi yang Tipis

Pharmaceutical temperature-controlled suitesMedical-device temperature-controlled assembly roomsLaboratorium yang dikendalikanTemperature-mapped corridors

Parameter teknis

Typical materials and dimensions for a low-profile cleanroom temperature sensor are shown below.

Bahan inti	Platinum RTD element in flame-retardant ABS or polycarbonate room housing
Ketebalan Panel (Panel Thickness)	20-35 mm sensor depth
Efektif lebar	70-100 mm housing width
Panjang maksimum	Up to 130 mm housing height
Baja menghadap ketebalan	0 mm; non-metallic room enclosure
Kepadatan inti (core density)	1040-1220 kg/m³ for ABS or polycarbonate housing
Konduktivitas Termal (Thermal Conductivity)	0.17-0.22 W/(m·K) for polymer housing material
Permukaan selesai	Smooth matte white housing with discreet side ventilation slots
Jenis Bersama	Two-part snap-fit wall housing with rear screw terminal or pluggable connector
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Pt100, Pt1000 or active outputDisplay or blank faceWall or duct mountingAnalog or digital transmitter

Planning a Temperature Sensor specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami