Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Móveis de sala limpa e produtos de aço inoxidável
Cirurgia Scrub Sink
A two-station all-welded Type 304 stainless surgical scrub sink with a deep bead-blast trough, independent knee valves, thermostatic mixing and laminar-flow gooseneck spouts.
- Two independent scrub stations
- Deep bead-blast wash trough
- Positive-action knee valves
- Thermostatic mixed-water supply
Introdução do produto
The surgical scrub sink provides two defined washing positions across a 1075 mm-wide deep trough. Each station has its own positive-action knee panel and plain-end laminar-flow gooseneck spout. A shared thermostatic mixing valve supplies controlled mixed water through two serviceable branch valves. The all-welded 16-gauge Type 304 enclosure uses a #4 satin exterior, bead-blast bowl and tall rear splash panel, with a lockable front fascia that opens to the knee linkages, branch plumbing and machined waste assembly.
Características-chave
The deep bead-blast trough contains forearm washing and reduces visible glare inside the active bowl.
A thermostatic mixing assembly feeds independently serviceable positive-action branch valves.
The tall backsplash and all-welded front fascia form one robust wall-mounted fixture for extended scrub movements.
Preocupações do produto do cliente
Pre-procedure scrubbing needs enough trough length for forearms, independent hands-free controls and accessible mixing/valve service without exposing plumbing to the room.
Two users sharing one water control interrupt one another's scrub sequence.Each position has a dedicated knee panel, positive-action valve and gooseneck spout.
Shallow basins let forearm wash water rebound over the front apron.The deep continuous trough and tall rear splash panel contain the extended washing movement.
Separate hot and cold controls force hand contact or inconsistent outlet temperature.A central thermostatic mixer supplies preset mixed water to both hands-free branch valves.
Concealed valve or drain failures require removal of the complete fixture.The lockable front fascia opens to the knee linkages, branch valves, mixer and machined waste.
Aplicações típicas
Operating theatre scrub areasInterventional procedure suitesSterile processing support roomsSurgical teaching facilitiesVeterinary operating preparation
Parâmetros técnicos
Typical configurable specifications for a two-station stainless surgical scrub sink are listed below.
| Material principal | All-welded Type 304 stainless two-station trough with dual knee valves, gooseneck spouts and thermostatic mixing assembly |
|---|---|
| Painel de espessura | 1.5 mm 16-gauge trough, backsplash and access fascia |
| Largura efetiva | 1075 mm overall two-station working width |
| Comprimento máximo | 687 mm maximum overall height including deep backsplash |
| Aço enfrentando espessura | 1.5 mm Type 304 stainless exposed fixture surfaces |
| Densidade Core | 7900 - 8000 kg / m3 para aço inoxidável tipo 304 |
| Condutividade térmica | 14 - 17 W / (m · K) para aço inoxidável tipo 304 |
| Superfície acabado | #4 satin-brushed exterior with low-glare bead-blast bowl and passivated continuous welds |
| Tipo conjunto | All-welded wall fixture with two knee-linked positive-action valves, thermostatic branch manifold and 38 mm machined waste |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Single- or three-station lengthInfrared activationIntegrated scrub timer displayType 316 stainless construction
Planning a Surgical Scrub Sink specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
