English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
غسلة فرك الجراحية
A two-station all-welded Type 304 stainless surgical scrub sink with a deep bead-blast trough, independent knee valves, thermostatic mixing and laminar-flow gooseneck spouts.
- Two independent scrub stations
- Deep bead-blast wash trough
- Positive-action knee valves
- Thermostatic mixed-water supply
مقدمة المنتج
The surgical scrub sink provides two defined washing positions across a 1075 mm-wide deep trough. Each station has its own positive-action knee panel and plain-end laminar-flow gooseneck spout. A shared thermostatic mixing valve supplies controlled mixed water through two serviceable branch valves. The all-welded 16-gauge Type 304 enclosure uses a #4 satin exterior, bead-blast bowl and tall rear splash panel, with a lockable front fascia that opens to the knee linkages, branch plumbing and machined waste assembly.
الخصائص الرئيسية
The deep bead-blast trough contains forearm washing and reduces visible glare inside the active bowl.
A thermostatic mixing assembly feeds independently serviceable positive-action branch valves.
The tall backsplash and all-welded front fascia form one robust wall-mounted fixture for extended scrub movements.
مخاوف المنتج للعملاء
Pre-procedure scrubbing needs enough trough length for forearms, independent hands-free controls and accessible mixing/valve service without exposing plumbing to the room.
Two users sharing one water control interrupt one another's scrub sequence.Each position has a dedicated knee panel, positive-action valve and gooseneck spout.
Shallow basins let forearm wash water rebound over the front apron.The deep continuous trough and tall rear splash panel contain the extended washing movement.
Separate hot and cold controls force hand contact or inconsistent outlet temperature.A central thermostatic mixer supplies preset mixed water to both hands-free branch valves.
Concealed valve or drain failures require removal of the complete fixture.The lockable front fascia opens to the knee linkages, branch valves, mixer and machined waste.
تطبيقات نموذجية
Operating theatre scrub areasInterventional procedure suitesSterile processing support roomsSurgical teaching facilitiesVeterinary operating preparation
المعلمات الفنية
Typical configurable specifications for a two-station stainless surgical scrub sink are listed below.
| المواد الأساسية | All-welded Type 304 stainless two-station trough with dual knee valves, gooseneck spouts and thermostatic mixing assembly |
|---|---|
| سمك اللوحة | 1.5 mm 16-gauge trough, backsplash and access fascia |
| العرض الفعال | 1075 mm overall two-station working width |
| الحد الأقصى الطول | 687 mm maximum overall height including deep backsplash |
| الصلب يواجه سمك | 1.5 mm Type 304 stainless exposed fixture surfaces |
| الكثافة الأساسية | 7900-8000 كجم / م3 لنوع 304 الفولاذ المقاوم للصدأ |
| الموصلية الحرارية | 14-17 W / (m · K) لنوع 304 الفولاذ المقاوم للصدأ |
| إنهاء السطح | #4 satin-brushed exterior with low-glare bead-blast bowl and passivated continuous welds |
| نوع المشترك | All-welded wall fixture with two knee-linked positive-action valves, thermostatic branch manifold and 38 mm machined waste |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single- or three-station lengthInfrared activationIntegrated scrub timer displayType 316 stainless construction
Planning a Surgical Scrub Sink specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
