Two-station stainless surgical scrub sink with knee panels

클린룸 가구 및 스테인레스 스틸 제품

외과 Scrub Sink

A two-station all-welded Type 304 stainless surgical scrub sink with a deep bead-blast trough, independent knee valves, thermostatic mixing and laminar-flow gooseneck spouts.

Two independent scrub stations
Deep bead-blast wash trough
Positive-action knee valves
Thermostatic mixed-water supply

견적 요청 제품 찾아보기

상품 소개

The surgical scrub sink provides two defined washing positions across a 1075 mm-wide deep trough. Each station has its own positive-action knee panel and plain-end laminar-flow gooseneck spout. A shared thermostatic mixing valve supplies controlled mixed water through two serviceable branch valves. The all-welded 16-gauge Type 304 enclosure uses a #4 satin exterior, bead-blast bowl and tall rear splash panel, with a lockable front fascia that opens to the knee linkages, branch plumbing and machined waste assembly.

주요 기능

Two separate knee panels and spouts allow simultaneous scrubbing without sharing an activation point.

The deep bead-blast trough contains forearm washing and reduces visible glare inside the active bowl.

A thermostatic mixing assembly feeds independently serviceable positive-action branch valves.

The tall backsplash and all-welded front fascia form one robust wall-mounted fixture for extended scrub movements.

고객 제품 관심사

Pre-procedure scrubbing needs enough trough length for forearms, independent hands-free controls and accessible mixing/valve service without exposing plumbing to the room.

Two users sharing one water control interrupt one another's scrub sequence.Each position has a dedicated knee panel, positive-action valve and gooseneck spout.

Shallow basins let forearm wash water rebound over the front apron.The deep continuous trough and tall rear splash panel contain the extended washing movement.

Separate hot and cold controls force hand contact or inconsistent outlet temperature.A central thermostatic mixer supplies preset mixed water to both hands-free branch valves.

Concealed valve or drain failures require removal of the complete fixture.The lockable front fascia opens to the knee linkages, branch valves, mixer and machined waste.

일반적인 응용 프로그램

Operating theatre scrub areasInterventional procedure suitesSterile processing support roomsSurgical teaching facilitiesVeterinary operating preparation

기술 매개변수

Typical configurable specifications for a two-station stainless surgical scrub sink are listed below.

핵심 재료	All-welded Type 304 stainless two-station trough with dual knee valves, gooseneck spouts and thermostatic mixing assembly
패널 두께	1.5 mm 16-gauge trough, backsplash and access fascia
유효 폭	1075 mm overall two-station working width
최대 길이	687 mm maximum overall height including deep backsplash
강철 면면 두께	1.5 mm Type 304 stainless exposed fixture surfaces
코어 밀도	7900 - 8000 kg / m 3 Type 304 스테인레스 스틸
열전도도 (Thermal Conductivity)	14 - 17 W / (m · K) 유형 304 스테인레스 스틸
표면 마무리	#4 satin-brushed exterior with low-glare bead-blast bowl and passivated continuous welds
접합 유형	All-welded wall fixture with two knee-linked positive-action valves, thermostatic branch manifold and 38 mm machined waste
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single- or three-station lengthInfrared activationIntegrated scrub timer displayType 316 stainless construction

Planning a Surgical Scrub Sink specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.