Two-station stainless surgical scrub sink with knee panels

Cleanroom Furniture dan Produk Stainless Steel

Pembedahan Scrub Sink

A two-station all-welded Type 304 stainless surgical scrub sink with a deep bead-blast trough, independent knee valves, thermostatic mixing and laminar-flow gooseneck spouts.

Two independent scrub stations
Deep bead-blast wash trough
Positive-action knee valves
Thermostatic mixed-water supply

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The surgical scrub sink provides two defined washing positions across a 1075 mm-wide deep trough. Each station has its own positive-action knee panel and plain-end laminar-flow gooseneck spout. A shared thermostatic mixing valve supplies controlled mixed water through two serviceable branch valves. The all-welded 16-gauge Type 304 enclosure uses a #4 satin exterior, bead-blast bowl and tall rear splash panel, with a lockable front fascia that opens to the knee linkages, branch plumbing and machined waste assembly.

Fitur utama:

Two separate knee panels and spouts allow simultaneous scrubbing without sharing an activation point.

The deep bead-blast trough contains forearm washing and reduces visible glare inside the active bowl.

A thermostatic mixing assembly feeds independently serviceable positive-action branch valves.

The tall backsplash and all-welded front fascia form one robust wall-mounted fixture for extended scrub movements.

Kekhawatiran produk pelanggan

Pre-procedure scrubbing needs enough trough length for forearms, independent hands-free controls and accessible mixing/valve service without exposing plumbing to the room.

Two users sharing one water control interrupt one another's scrub sequence.Each position has a dedicated knee panel, positive-action valve and gooseneck spout.

Shallow basins let forearm wash water rebound over the front apron.The deep continuous trough and tall rear splash panel contain the extended washing movement.

Separate hot and cold controls force hand contact or inconsistent outlet temperature.A central thermostatic mixer supplies preset mixed water to both hands-free branch valves.

Concealed valve or drain failures require removal of the complete fixture.The lockable front fascia opens to the knee linkages, branch valves, mixer and machined waste.

Aplikasi yang Tipis

Operating theatre scrub areasInterventional procedure suitesSterile processing support roomsSurgical teaching facilitiesVeterinary operating preparation

Parameter teknis

Typical configurable specifications for a two-station stainless surgical scrub sink are listed below.

Bahan inti	All-welded Type 304 stainless two-station trough with dual knee valves, gooseneck spouts and thermostatic mixing assembly
Ketebalan Panel (Panel Thickness)	1.5 mm 16-gauge trough, backsplash and access fascia
Efektif lebar	1075 mm overall two-station working width
Panjang maksimum	687 mm maximum overall height including deep backsplash
Baja menghadap ketebalan	1.5 mm Type 304 stainless exposed fixture surfaces
Kepadatan inti (core density)	7900 - 8000 kg / m3 untuk baja tahan karat Tipe 304
Konduktivitas Termal (Thermal Conductivity)	14 - 17 W / (m · K) untuk baja tahan karat Tipe 304
Permukaan selesai	#4 satin-brushed exterior with low-glare bead-blast bowl and passivated continuous welds
Jenis Bersama	All-welded wall fixture with two knee-linked positive-action valves, thermostatic branch manifold and 38 mm machined waste
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Single- or three-station lengthInfrared activationIntegrated scrub timer displayTipe 316 konstruksi stainless

Planning a Surgical Scrub Sink specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami