Two-station stainless surgical scrub sink with knee panels

クリーンルーム家具 · ステンレス製品

外科的なスクラブシンク

A two-station all-welded Type 304 stainless surgical scrub sink with a deep bead-blast trough, independent knee valves, thermostatic mixing and laminar-flow gooseneck spouts.

Two independent scrub stations
Deep bead-blast wash trough
Positive-action knee valves
Thermostatic mixed-water supply

見積もりリクエスト製品案内

商品紹介

The surgical scrub sink provides two defined washing positions across a 1075 mm-wide deep trough. Each station has its own positive-action knee panel and plain-end laminar-flow gooseneck spout. A shared thermostatic mixing valve supplies controlled mixed water through two serviceable branch valves. The all-welded 16-gauge Type 304 enclosure uses a #4 satin exterior, bead-blast bowl and tall rear splash panel, with a lockable front fascia that opens to the knee linkages, branch plumbing and machined waste assembly.

主要な特徴

Two separate knee panels and spouts allow simultaneous scrubbing without sharing an activation point.

The deep bead-blast trough contains forearm washing and reduces visible glare inside the active bowl.

A thermostatic mixing assembly feeds independently serviceable positive-action branch valves.

The tall backsplash and all-welded front fascia form one robust wall-mounted fixture for extended scrub movements.

お客様の製品に関する懸念事項

Pre-procedure scrubbing needs enough trough length for forearms, independent hands-free controls and accessible mixing/valve service without exposing plumbing to the room.

Two users sharing one water control interrupt one another's scrub sequence.Each position has a dedicated knee panel, positive-action valve and gooseneck spout.

Shallow basins let forearm wash water rebound over the front apron.The deep continuous trough and tall rear splash panel contain the extended washing movement.

Separate hot and cold controls force hand contact or inconsistent outlet temperature.A central thermostatic mixer supplies preset mixed water to both hands-free branch valves.

Concealed valve or drain failures require removal of the complete fixture.The lockable front fascia opens to the knee linkages, branch valves, mixer and machined waste.

典型的な用途

Operating theatre scrub areasInterventional procedure suitesSterile processing support roomsSurgical teaching facilitiesVeterinary operating preparation

技術的なパラメータ

Typical configurable specifications for a two-station stainless surgical scrub sink are listed below.

コア材料	All-welded Type 304 stainless two-station trough with dual knee valves, gooseneck spouts and thermostatic mixing assembly
パネルの厚さ	1.5 mm 16-gauge trough, backsplash and access fascia
有効幅	1075 mm overall two-station working width
最大長さ	687 mm maximum overall height including deep backsplash
鋼鉄の厚さを直面する	1.5 mm Type 304 stainless exposed fixture surfaces
コア密度	タイプ 304 のステンレス鋼のための 7900 — 8000 kg / m3
熱伝導率	タイプ 304 ステンレス鋼 14 〜 17 W / （m · K）
表面仕上げ	#4 satin-brushed exterior with low-glare bead-blast bowl and passivated continuous welds
ジョイントタイプ	All-welded wall fixture with two knee-linked positive-action valves, thermostatic branch manifold and 38 mm machined waste
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single- or three-station lengthInfrared activationIntegrated scrub timer displayType 316 stainless construction

Planning a Surgical Scrub Sink specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する