Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Filtros de ar e filtragem química
Z Filtro Slim HEPA
A shallow mini-pleat HEPA panel designed for cleanroom ceiling modules and process equipment where installation depth is tightly restricted.
- Shallow 45–69 mm Profile
- Mini-Pleat Glass Media
- Lightweight Aluminium Frame
- Terminal-Housing Compatibility
Introdução do produto
The slim HEPA filter compresses a high-area glass-microfibre mini-pleat pack into a low-profile anodized-aluminium frame. Narrow hot-melt spacers maintain defined flow passages, while continuous polyurethane potting locks the short pack into the frame. A downstream faceguard protects the media without adding significant depth. The reduced profile is useful for cleanroom terminal boxes, laminar-flow workstations and compact equipment enclosures where ductwork, lighting or services leave little space above the filter face.
Características-chave
Dense mini-pleat geometry preserves useful media area within the shallow construction.
Extruded aluminium frame members provide straight gasket lands without unnecessary mass.
A fine downstream faceguard prevents accidental contact with the exposed pleat tips.
Preocupações do produto do cliente
Space-limited cleanroom equipment still requires a dependable final filter, but a standard deep panel can conflict with ductwork, lighting or machine envelopes.
The available ceiling void cannot accommodate a 90–150 mm filter frame.A shallow extruded frame reduces the installed depth while retaining a mini-pleat HEPA media pack.
A short filter pack loses too much effective media area.Closely controlled pleat pitch places more filter surface into the limited frame volume.
Thin media is easily touched during installation into compact equipment.A fitted expanded-metal faceguard protects the discharge face and pleat tips.
Uneven clamping bends a lightweight shallow frame.Reinforced aluminium corners and a continuous gasket land distribute compression around the perimeter.
Aplicações típicas
Low-profile cleanroom ceiling terminalsLaminar-flow workstationsIsolator and enclosure supply modulesCompact fan filter unitsEquipment mini-environments
Parâmetros técnicos
Typical construction ranges for a low-profile slim HEPA filter are shown below.
| Material principal | Water-resistant glass-microfibre HEPA media with fine hot-melt mini-pleat separators |
|---|---|
| Painel de espessura | 45–69 mm overall frame depth |
| Largura efetiva | 305 - 610 mm Largura nominal da face |
| Comprimento máximo | Até 1220 mm de comprimento nominal do rosto |
| Aço enfrentando espessura | 0.4–0.5 mm powder-coated expanded-steel protective faceguard |
| Densidade Core | Approximately 32–48 kg/m³ equivalent compact media-pack density |
| Condutividade térmica | Approximately 0.035–0.043 W/(m·K) for the glass-microfibre media |
| Superfície acabado | Natural anodized aluminium with clean white powder-coated faceguard |
| Tipo conjunto | Continuous EPDM gasket or shallow polyurethane gel channel |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
45 mm, 54 mm or 69 mm frame depthH13 or H14 media packUpstream gasket or downstream gel sealOne-sided or two-sided faceguard
Planning a Slim HEPA Filter specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
