Three-quarter view of shallow slim HEPA filter with white mini-pleat face

Filter udara dan filtrasi kimia

Filter HEPA Slim

A shallow mini-pleat HEPA panel designed for cleanroom ceiling modules and process equipment where installation depth is tightly restricted.

Shallow 45–69 mm Profile
Mini-Pleat Glass Media
Lightweight Aluminium Frame
Terminal-Housing Compatibility

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The slim HEPA filter compresses a high-area glass-microfibre mini-pleat pack into a low-profile anodized-aluminium frame. Narrow hot-melt spacers maintain defined flow passages, while continuous polyurethane potting locks the short pack into the frame. A downstream faceguard protects the media without adding significant depth. The reduced profile is useful for cleanroom terminal boxes, laminar-flow workstations and compact equipment enclosures where ductwork, lighting or services leave little space above the filter face.

Fitur utama:

A 45–69 mm frame depth fits terminal modules that cannot accept a conventional deep HEPA panel.

Dense mini-pleat geometry preserves useful media area within the shallow construction.

Extruded aluminium frame members provide straight gasket lands without unnecessary mass.

A fine downstream faceguard prevents accidental contact with the exposed pleat tips.

Kekhawatiran produk pelanggan

Space-limited cleanroom equipment still requires a dependable final filter, but a standard deep panel can conflict with ductwork, lighting or machine envelopes.

The available ceiling void cannot accommodate a 90–150 mm filter frame.A shallow extruded frame reduces the installed depth while retaining a mini-pleat HEPA media pack.

A short filter pack loses too much effective media area.Closely controlled pleat pitch places more filter surface into the limited frame volume.

Thin media is easily touched during installation into compact equipment.A fitted expanded-metal faceguard protects the discharge face and pleat tips.

Uneven clamping bends a lightweight shallow frame.Reinforced aluminium corners and a continuous gasket land distribute compression around the perimeter.

Aplikasi yang Tipis

Low-profile cleanroom ceiling terminalsLaminar-flow workstationsIsolator and enclosure supply modulesCompact fan filter unitsEquipment mini-environments

Parameter teknis

Typical construction ranges for a low-profile slim HEPA filter are shown below.

Bahan inti	Water-resistant glass-microfibre HEPA media with fine hot-melt mini-pleat separators
Ketebalan Panel (Panel Thickness)	45–69 mm overall frame depth
Efektif lebar	305–610 mm nominal face width
Panjang maksimum	Up to 1220 mm nominal face length
Baja menghadap ketebalan	0.4–0.5 mm powder-coated expanded-steel protective faceguard
Kepadatan inti (core density)	Approximately 32–48 kg/m³ equivalent compact media-pack density
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.035–0.043 W/(m·K) for the glass-microfibre media
Permukaan selesai	Natural anodized aluminium with clean white powder-coated faceguard
Jenis Bersama	Continuous EPDM gasket or shallow polyurethane gel channel
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

45 mm, 54 mm or 69 mm frame depthH13 or H14 media packUpstream gasket or downstream gel sealOne-sided or two-sided faceguard

Planning a Slim HEPA Filter specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami