English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
Slim مرشح HEPA
A shallow mini-pleat HEPA panel designed for cleanroom ceiling modules and process equipment where installation depth is tightly restricted.
- Shallow 45–69 mm Profile
- Mini-Pleat Glass Media
- Lightweight Aluminium Frame
- Terminal-Housing Compatibility
مقدمة المنتج
The slim HEPA filter compresses a high-area glass-microfibre mini-pleat pack into a low-profile anodized-aluminium frame. Narrow hot-melt spacers maintain defined flow passages, while continuous polyurethane potting locks the short pack into the frame. A downstream faceguard protects the media without adding significant depth. The reduced profile is useful for cleanroom terminal boxes, laminar-flow workstations and compact equipment enclosures where ductwork, lighting or services leave little space above the filter face.
الخصائص الرئيسية
Dense mini-pleat geometry preserves useful media area within the shallow construction.
Extruded aluminium frame members provide straight gasket lands without unnecessary mass.
A fine downstream faceguard prevents accidental contact with the exposed pleat tips.
مخاوف المنتج للعملاء
Space-limited cleanroom equipment still requires a dependable final filter, but a standard deep panel can conflict with ductwork, lighting or machine envelopes.
The available ceiling void cannot accommodate a 90–150 mm filter frame.A shallow extruded frame reduces the installed depth while retaining a mini-pleat HEPA media pack.
A short filter pack loses too much effective media area.Closely controlled pleat pitch places more filter surface into the limited frame volume.
Thin media is easily touched during installation into compact equipment.A fitted expanded-metal faceguard protects the discharge face and pleat tips.
Uneven clamping bends a lightweight shallow frame.Reinforced aluminium corners and a continuous gasket land distribute compression around the perimeter.
تطبيقات نموذجية
Low-profile cleanroom ceiling terminalsمحطات عمل التدفق الصفائقيIsolator and enclosure supply modulesCompact fan filter unitsEquipment mini-environments
المعلمات الفنية
Typical construction ranges for a low-profile slim HEPA filter are shown below.
| المواد الأساسية | Water-resistant glass-microfibre HEPA media with fine hot-melt mini-pleat separators |
|---|---|
| سمك اللوحة | 45–69 mm overall frame depth |
| العرض الفعال | 305-610 مم عرض الوجه الاسمي |
| الحد الأقصى الطول | ما يصل إلى 1220 مم طول الوجه الاسمي |
| الصلب يواجه سمك | 0.4–0.5 mm powder-coated expanded-steel protective faceguard |
| الكثافة الأساسية | Approximately 32–48 kg/m³ equivalent compact media-pack density |
| الموصلية الحرارية | Approximately 0.035–0.043 W/(m·K) for the glass-microfibre media |
| إنهاء السطح | Natural anodized aluminium with clean white powder-coated faceguard |
| نوع المشترك | Continuous EPDM gasket or shallow polyurethane gel channel |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
45 mm, 54 mm or 69 mm frame depthH13 or H14 media packUpstream gasket or downstream gel sealOne-sided or two-sided faceguard
Planning a Slim HEPA Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
