Three-quarter view of shallow slim HEPA filter with white mini-pleat face

공기 필터 및 화학 여과

Slim HEPA 필터

A shallow mini-pleat HEPA panel designed for cleanroom ceiling modules and process equipment where installation depth is tightly restricted.

Shallow 45–69 mm Profile
Mini-Pleat Glass Media
Lightweight Aluminium Frame
Terminal-Housing Compatibility

견적 요청 제품 찾아보기

상품 소개

The slim HEPA filter compresses a high-area glass-microfibre mini-pleat pack into a low-profile anodized-aluminium frame. Narrow hot-melt spacers maintain defined flow passages, while continuous polyurethane potting locks the short pack into the frame. A downstream faceguard protects the media without adding significant depth. The reduced profile is useful for cleanroom terminal boxes, laminar-flow workstations and compact equipment enclosures where ductwork, lighting or services leave little space above the filter face.

주요 기능

A 45–69 mm frame depth fits terminal modules that cannot accept a conventional deep HEPA panel.

Dense mini-pleat geometry preserves useful media area within the shallow construction.

Extruded aluminium frame members provide straight gasket lands without unnecessary mass.

A fine downstream faceguard prevents accidental contact with the exposed pleat tips.

고객 제품 관심사

Space-limited cleanroom equipment still requires a dependable final filter, but a standard deep panel can conflict with ductwork, lighting or machine envelopes.

The available ceiling void cannot accommodate a 90–150 mm filter frame.A shallow extruded frame reduces the installed depth while retaining a mini-pleat HEPA media pack.

A short filter pack loses too much effective media area.Closely controlled pleat pitch places more filter surface into the limited frame volume.

Thin media is easily touched during installation into compact equipment.A fitted expanded-metal faceguard protects the discharge face and pleat tips.

Uneven clamping bends a lightweight shallow frame.Reinforced aluminium corners and a continuous gasket land distribute compression around the perimeter.

일반적인 응용 프로그램

Low-profile cleanroom ceiling terminalsLaminar-flow workstationsIsolator and enclosure supply modulesCompact fan filter unitsEquipment mini-environments

기술 매개변수

Typical construction ranges for a low-profile slim HEPA filter are shown below.

핵심 재료	Water-resistant glass-microfibre HEPA media with fine hot-melt mini-pleat separators
패널 두께	45–69 mm overall frame depth
유효 폭	305 - 610 mm 공칭 면 너비
최대 길이	최대 1220 mm 공칭 면 길이
강철 면면 두께	0.4–0.5 mm powder-coated expanded-steel protective faceguard
코어 밀도	Approximately 32–48 kg/m³ equivalent compact media-pack density
열전도도 (Thermal Conductivity)	Approximately 0.035–0.043 W/(m·K) for the glass-microfibre media
표면 마무리	Natural anodized aluminium with clean white powder-coated faceguard
접합 유형	Continuous EPDM gasket or shallow polyurethane gel channel
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

45 mm, 54 mm or 69 mm frame depthH13 or H14 media packUpstream gasket or downstream gel sealOne-sided or two-sided faceguard

Planning a Slim HEPA Filter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.