Three-quarter view of shallow slim HEPA filter with white mini-pleat face

エアフィルターと化学ろ過

Slim HEPA フィルター

A shallow mini-pleat HEPA panel designed for cleanroom ceiling modules and process equipment where installation depth is tightly restricted.

Shallow 45–69 mm Profile
Mini-Pleat Glass Media
Lightweight Aluminium Frame
Terminal-Housing Compatibility

見積もりリクエスト製品案内

商品紹介

The slim HEPA filter compresses a high-area glass-microfibre mini-pleat pack into a low-profile anodized-aluminium frame. Narrow hot-melt spacers maintain defined flow passages, while continuous polyurethane potting locks the short pack into the frame. A downstream faceguard protects the media without adding significant depth. The reduced profile is useful for cleanroom terminal boxes, laminar-flow workstations and compact equipment enclosures where ductwork, lighting or services leave little space above the filter face.

主要な特徴

A 45–69 mm frame depth fits terminal modules that cannot accept a conventional deep HEPA panel.

Dense mini-pleat geometry preserves useful media area within the shallow construction.

Extruded aluminium frame members provide straight gasket lands without unnecessary mass.

A fine downstream faceguard prevents accidental contact with the exposed pleat tips.

お客様の製品に関する懸念事項

Space-limited cleanroom equipment still requires a dependable final filter, but a standard deep panel can conflict with ductwork, lighting or machine envelopes.

The available ceiling void cannot accommodate a 90–150 mm filter frame.A shallow extruded frame reduces the installed depth while retaining a mini-pleat HEPA media pack.

A short filter pack loses too much effective media area.Closely controlled pleat pitch places more filter surface into the limited frame volume.

Thin media is easily touched during installation into compact equipment.A fitted expanded-metal faceguard protects the discharge face and pleat tips.

Uneven clamping bends a lightweight shallow frame.Reinforced aluminium corners and a continuous gasket land distribute compression around the perimeter.

典型的な用途

Low-profile cleanroom ceiling terminalsLaminar-flow workstationsIsolator and enclosure supply modulesCompact fan filter unitsEquipment mini-environments

技術的なパラメータ

Typical construction ranges for a low-profile slim HEPA filter are shown below.

コア材料	Water-resistant glass-microfibre HEPA media with fine hot-melt mini-pleat separators
パネルの厚さ	45–69 mm overall frame depth
有効幅	305 — 610 mm 公称面幅
最大長さ	Up to 1220 mm nominal face length
鋼鉄の厚さを直面する	0.4–0.5 mm powder-coated expanded-steel protective faceguard
コア密度	Approximately 32–48 kg/m³ equivalent compact media-pack density
熱伝導率	Approximately 0.035–0.043 W/(m·K) for the glass-microfibre media
表面仕上げ	Natural anodized aluminium with clean white powder-coated faceguard
ジョイントタイプ	Continuous EPDM gasket or shallow polyurethane gel channel
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

45 mm, 54 mm or 69 mm frame depthH13 or H14 media packUpstream gasket or downstream gel seal片面または両面の面ガード

Planning a Slim HEPA Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する