Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Filtro Slim HEPA
A shallow mini-pleat HEPA panel designed for cleanroom ceiling modules and process equipment where installation depth is tightly restricted.
- Shallow 45–69 mm Profile
- Mini-Pleat Glass Media
- Lightweight Aluminium Frame
- Terminal-Housing Compatibility
Introducción del producto
The slim HEPA filter compresses a high-area glass-microfibre mini-pleat pack into a low-profile anodized-aluminium frame. Narrow hot-melt spacers maintain defined flow passages, while continuous polyurethane potting locks the short pack into the frame. A downstream faceguard protects the media without adding significant depth. The reduced profile is useful for cleanroom terminal boxes, laminar-flow workstations and compact equipment enclosures where ductwork, lighting or services leave little space above the filter face.
Características clave
Dense mini-pleat geometry preserves useful media area within the shallow construction.
Extruded aluminium frame members provide straight gasket lands without unnecessary mass.
A fine downstream faceguard prevents accidental contact with the exposed pleat tips.
Preocupaciones del producto del cliente
Space-limited cleanroom equipment still requires a dependable final filter, but a standard deep panel can conflict with ductwork, lighting or machine envelopes.
The available ceiling void cannot accommodate a 90–150 mm filter frame.A shallow extruded frame reduces the installed depth while retaining a mini-pleat HEPA media pack.
A short filter pack loses too much effective media area.Closely controlled pleat pitch places more filter surface into the limited frame volume.
Thin media is easily touched during installation into compact equipment.A fitted expanded-metal faceguard protects the discharge face and pleat tips.
Uneven clamping bends a lightweight shallow frame.Reinforced aluminium corners and a continuous gasket land distribute compression around the perimeter.
Aplicaciones típicas
Low-profile cleanroom ceiling terminalsLaminar-flow workstationsIsolator and enclosure supply modulesCompact fan filter unitsEquipment mini-environments
Parámetros técnicos
Typical construction ranges for a low-profile slim HEPA filter are shown below.
| Materiales Core | Water-resistant glass-microfibre HEPA media with fine hot-melt mini-pleat separators |
|---|---|
| Panel de espesor | 45–69 mm overall frame depth |
| Ancho efectivo | 305 - 610 mm Ancho nominal de cara |
| Longitud máxima | Hasta 1220 mm de longitud nominal de cara por |
| Acero frente a espesor | 0.4–0.5 mm powder-coated expanded-steel protective faceguard |
| Densidad Core | Approximately 32–48 kg/m³ equivalent compact media-pack density |
| Conductividad térmica | Approximately 0.035–0.043 W/(m·K) for the glass-microfibre media |
| Superficie acabada | Natural anodized aluminium with clean white powder-coated faceguard |
| Tipo conjunto | Continuous EPDM gasket or shallow polyurethane gel channel |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
45 mm, 54 mm or 69 mm frame depthH13 or H14 media packUpstream gasket or downstream gel sealOne-sided or two-sided faceguard
Planning a Slim HEPA Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
