Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Proteção Suit De-Dusting Booth
A dry extraction booth that dislodges loose powder from protective clothing and captures it through a dedicated airflow path.
- Dry Suit Cleaning
- Full-Height Extraction
- Staged Dust Collection
- Timed Post-Clean Purge
Introdução do produto
The de-dusting booth is intended for powder processes where water is impractical. Directional air from adjustable nozzles loosens residue from the garment while an extraction face pulls contaminated air away from the operator. Pre-separation reduces the loading on the final filter, and dirty-side maintenance access separates captured material from the exit route.
Características-chave
Negative chamber bias reduces outward leakage at doors and service panels.
A prefilter or separator removes high-mass dust before the final stage.
Dirty-side doors support contained filter and collection maintenance.
A timed extraction purge continues after the cleaning jets stop.
Preocupações do produto do cliente
Dry cleaning must capture dislodged particles immediately instead of redistributing them into the changing area.
Air jets release dust that remains around the operator.A full-height extraction face establishes one directional path from nozzle wall to collection system.
Heavy powder quickly blocks a fine final filter.A coarse pre-stage removes the largest fraction before final filtration.
Changing filters exposes clean-side staff.Service access is located on the designated dirty side of the booth.
Dust exits with the operator as soon as the jets stop.The clean-side door remains locked through a post-clean extraction purge.
Aplicações típicas
Dry pharmaceutical powder roomsBattery-material handlingPigment productionCeramic powder processing
Parâmetros técnicos
Typical enclosure ranges for a protective-suit de-dusting booth are shown below.
| Material principal | Mineral-wool insulated steel booth with air nozzles, extraction plenum and staged dust filters |
|---|---|
| Painel de espessura | 50-75 mm acoustic and dust-tight panels |
| Largura efetiva | 1000-1400 mm clear operator width |
| Comprimento máximo | Up to 2200 mm booth length |
| Aço enfrentando espessura | 1.2-1.5 mm formed steel with stainless internal wear surfaces |
| Densidade Core | 80-100 kg/m³ mineral-wool acoustic infill |
| Condutividade térmica | 0.035-0.045 W/(m·K) for the insulated enclosure |
| Superfície acabado | Powder-coated steel exterior with smooth stainless extraction and floor contact surfaces |
| Tipo conjunto | Dust-tight flanged seams with gasketed filter cassettes and interlocked personnel doors |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Compressed-air or blower cleaning sourceCartridge or panel final filtersBag-out collection sectionDifferential-pressure monitoring
Planning a Protective Suit De-Dusting Booth specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
