Protective suit de-dusting booth with extraction cabinet and light steel enclosure

Peralatan Dekontaminasi Kakitangan dan Bahan

Suit Perlindungan De-Dusting Booth

A dry extraction booth that dislodges loose powder from protective clothing and captures it through a dedicated airflow path.

Dry Suit Cleaning
Full-Height Extraction
Staged Dust Collection
Timed Post-Clean Purge

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The de-dusting booth is intended for powder processes where water is impractical. Directional air from adjustable nozzles loosens residue from the garment while an extraction face pulls contaminated air away from the operator. Pre-separation reduces the loading on the final filter, and dirty-side maintenance access separates captured material from the exit route.

Ciri-ciri Utama

A cross-flow layout moves released dust from cleaning nozzles directly to extraction.

Negative chamber bias reduces outward leakage at doors and service panels.

A prefilter or separator removes high-mass dust before the final stage.

Dirty-side doors support contained filter and collection maintenance.

A timed extraction purge continues after the cleaning jets stop.

Kebimbangan Produk Pelanggan

Dry cleaning must capture dislodged particles immediately instead of redistributing them into the changing area.

Air jets release dust that remains around the operator.A full-height extraction face establishes one directional path from nozzle wall to collection system.

Heavy powder quickly blocks a fine final filter.A coarse pre-stage removes the largest fraction before final filtration.

Changing filters exposes clean-side staff.Service access is located on the designated dirty side of the booth.

Dust exits with the operator as soon as the jets stop.The clean-side door remains locked through a post-clean extraction purge.

Permohonan yang biasa

Dry pharmaceutical powder roomsBattery-material handlingPigment productionCeramic powder processing

Parameter teknikal

Typical enclosure ranges for a protective-suit de-dusting booth are shown below.

Bahan Teras	Mineral-wool insulated steel booth with air nozzles, extraction plenum and staged dust filters
Ketebalan Panel	50-75 mm acoustic and dust-tight panels
Lebar berkesan	1000-1400 mm clear operator width
Panjang maksimum	Up to 2200 mm booth length
Keluli Menghadapi Ketebalan	1.2-1.5 mm formed steel with stainless internal wear surfaces
Ketumpatan teras	80-100 kg/m³ mineral-wool acoustic infill
Kekonduksian Terma	0.035-0.045 W/(m·K) for the insulated enclosure
Kemasan permukaan	Powder-coated steel exterior with smooth stainless extraction and floor contact surfaces
Jenis Bersatu	Dust-tight flanged seams with gasketed filter cassettes and interlocked personnel doors
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Compressed-air or blower cleaning sourceCartridge or panel final filtersBag-out collection sectionDifferential-pressure monitoring

Planning a Protective Suit De-Dusting Booth specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami