Protective suit de-dusting booth with extraction cabinet and light steel enclosure

人員 · 材料の汚染除去設備

保護スーツの除塵ブース

A dry extraction booth that dislodges loose powder from protective clothing and captures it through a dedicated airflow path.

Dry Suit Cleaning
Full-Height Extraction
Staged Dust Collection
Timed Post-Clean Purge

見積もりリクエスト製品案内

商品紹介

The de-dusting booth is intended for powder processes where water is impractical. Directional air from adjustable nozzles loosens residue from the garment while an extraction face pulls contaminated air away from the operator. Pre-separation reduces the loading on the final filter, and dirty-side maintenance access separates captured material from the exit route.

主要な特徴

A cross-flow layout moves released dust from cleaning nozzles directly to extraction.

Negative chamber bias reduces outward leakage at doors and service panels.

A prefilter or separator removes high-mass dust before the final stage.

Dirty-side doors support contained filter and collection maintenance.

A timed extraction purge continues after the cleaning jets stop.

お客様の製品に関する懸念事項

Dry cleaning must capture dislodged particles immediately instead of redistributing them into the changing area.

Air jets release dust that remains around the operator.A full-height extraction face establishes one directional path from nozzle wall to collection system.

Heavy powder quickly blocks a fine final filter.A coarse pre-stage removes the largest fraction before final filtration.

Changing filters exposes clean-side staff.Service access is located on the designated dirty side of the booth.

Dust exits with the operator as soon as the jets stop.The clean-side door remains locked through a post-clean extraction purge.

典型的な用途

Dry pharmaceutical powder roomsBattery-material handlingPigment productionCeramic powder processing

技術的なパラメータ

Typical enclosure ranges for a protective-suit de-dusting booth are shown below.

コア材料	Mineral-wool insulated steel booth with air nozzles, extraction plenum and staged dust filters
パネルの厚さ	50-75 mm acoustic and dust-tight panels
有効幅	1000-1400 mm clear operator width
最大長さ	Up to 2200 mm booth length
鋼鉄の厚さを直面する	1.2-1.5 mm formed steel with stainless internal wear surfaces
コア密度	80-100 kg/m³ mineral-wool acoustic infill
熱伝導率	0.035-0.045 W/(m·K) for the insulated enclosure
表面仕上げ	Powder-coated steel exterior with smooth stainless extraction and floor contact surfaces
ジョイントタイプ	Dust-tight flanged seams with gasketed filter cassettes and interlocked personnel doors
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Compressed-air or blower cleaning sourceCartridge or panel final filtersBag-out collection sectionDifferential-pressure monitoring

Planning a Protective Suit De-Dusting Booth specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する