Protective suit de-dusting booth with extraction cabinet and light steel enclosure

Персонал и оборудование для дезактивации материалов

Защитный костюм для очистки от пыли

A dry extraction booth that dislodges loose powder from protective clothing and captures it through a dedicated airflow path.

Dry Suit Cleaning
Full-Height Extraction
Staged Dust Collection
Timed Post-Clean Purge

Запрос котировки Просмотреть продукты

Введение продукции

The de-dusting booth is intended for powder processes where water is impractical. Directional air from adjustable nozzles loosens residue from the garment while an extraction face pulls contaminated air away from the operator. Pre-separation reduces the loading on the final filter, and dirty-side maintenance access separates captured material from the exit route.

Основные характеристики

A cross-flow layout moves released dust from cleaning nozzles directly to extraction.

Negative chamber bias reduces outward leakage at doors and service panels.

A prefilter or separator removes high-mass dust before the final stage.

Dirty-side doors support contained filter and collection maintenance.

A timed extraction purge continues after the cleaning jets stop.

Обеспокоенность клиентов продуктами

Dry cleaning must capture dislodged particles immediately instead of redistributing them into the changing area.

Air jets release dust that remains around the operator.A full-height extraction face establishes one directional path from nozzle wall to collection system.

Heavy powder quickly blocks a fine final filter.A coarse pre-stage removes the largest fraction before final filtration.

Changing filters exposes clean-side staff.Service access is located on the designated dirty side of the booth.

Dust exits with the operator as soon as the jets stop.The clean-side door remains locked through a post-clean extraction purge.

Типичные приложения

Dry pharmaceutical powder roomsBattery-material handlingPigment productionCeramic powder processing

Технические параметры

Typical enclosure ranges for a protective-suit de-dusting booth are shown below.

Основной материал	Mineral-wool insulated steel booth with air nozzles, extraction plenum and staged dust filters
Толщина панели	50-75 mm acoustic and dust-tight panels
эффективная ширина	1000-1400 mm clear operator width
Максимальная длина	Up to 2200 mm booth length
Толщина линий стали	1.2-1.5 mm formed steel with stainless internal wear surfaces
Плотность ядра	80-100 kg/m³ mineral-wool acoustic infill
Теплопроводимость	0.035-0.045 W/(m·K) for the insulated enclosure
Поверхностная отделка	Powder-coated steel exterior with smooth stainless extraction and floor contact surfaces
Объединенный тип	Dust-tight flanged seams with gasketed filter cassettes and interlocked personnel doors
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Compressed-air or blower cleaning sourceCartridge or panel final filtersBag-out collection sectionDifferential-pressure monitoring

Planning a Protective Suit De-Dusting Booth specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой