Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Protecteur De-Dusting Booth
A dry extraction booth that dislodges loose powder from protective clothing and captures it through a dedicated airflow path.
- Dry Suit Cleaning
- Full-Height Extraction
- Staged Dust Collection
- Timed Post-Clean Purge
Introduction de produit
The de-dusting booth is intended for powder processes where water is impractical. Directional air from adjustable nozzles loosens residue from the garment while an extraction face pulls contaminated air away from the operator. Pre-separation reduces the loading on the final filter, and dirty-side maintenance access separates captured material from the exit route.
Key Features
Negative chamber bias reduces outward leakage at doors and service panels.
A prefilter or separator removes high-mass dust before the final stage.
Dirty-side doors support contained filter and collection maintenance.
A timed extraction purge continues after the cleaning jets stop.
Préoccupations du client produit
Dry cleaning must capture dislodged particles immediately instead of redistributing them into the changing area.
Air jets release dust that remains around the operator.A full-height extraction face establishes one directional path from nozzle wall to collection system.
Heavy powder quickly blocks a fine final filter.A coarse pre-stage removes the largest fraction before final filtration.
Changing filters exposes clean-side staff.Service access is located on the designated dirty side of the booth.
Dust exits with the operator as soon as the jets stop.The clean-side door remains locked through a post-clean extraction purge.
Les applications typiques
Dry pharmaceutical powder roomsBattery-material handlingPigment productionCeramic powder processing
Paramètres techniques
Typical enclosure ranges for a protective-suit de-dusting booth are shown below.
| Matériaux de base | Mineral-wool insulated steel booth with air nozzles, extraction plenum and staged dust filters |
|---|---|
| Panneau épaisseur | 50-75 mm acoustic and dust-tight panels |
| Largeur effective | 1000-1400 mm clear operator width |
| Longueur maximale | Up to 2200 mm booth length |
| Acier face épaisseur | 1.2-1.5 mm formed steel with stainless internal wear surfaces |
| Densité Core | 80-100 kg/m³ mineral-wool acoustic infill |
| Conductivité thermique | 0.035-0.045 W/(m·K) for the insulated enclosure |
| surface finie | Powder-coated steel exterior with smooth stainless extraction and floor contact surfaces |
| Type joint | Dust-tight flanged seams with gasketed filter cassettes and interlocked personnel doors |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Compressed-air or blower cleaning sourceCartridge or panel final filtersBag-out collection sectionDifferential-pressure monitoring
Planning a Protective Suit De-Dusting Booth specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
