Modular local clean-air workstation surrounding a process fixture

Fluxo laminar e equipamentos de contenção

Z Estação de trabalho de ar limpo local

A modular open-frame station that places filtered clean air over one selected process step without enclosing the surrounding production area.

Targeted Process Coverage
Modular Open Frame
Adjustable Airflow Footprint
Equipment-Ready Work Zone

Solicite um orçamento. Browse produtos

Introdução do produto

This workstation is configured around a specific instrument, assembly fixture or inspection step rather than a fixed clean-bench format. Fan-filter modules can be mounted above or behind the process, and clear panels or partial curtains are added only where they help control room drafts. The open frame leaves the process accessible for material loading and maintenance. Its purpose is localized non-hazardous product protection within an already managed indoor environment.

Características-chave

The frame and filter position can be matched to the actual process footprint.

Open sides allow conveyors, fixtures and service access to pass through the station.

Partial panels control the most disruptive room-air directions without fully enclosing the operator.

Utility rails accept task lights, outlets and lightweight process accessories.

Independent controls allow the local airflow to operate with the process schedule.

Preocupações do produto do cliente

A standard bench can be the wrong shape for an installed process, while full-room upgrades may be unnecessary for one critical operation.

The process fixture cannot fit inside a conventional cabinet.An open modular frame is built around the installed equipment envelope.

Only one operation needs cleaner air than the surrounding room.Targeted fan-filter coverage concentrates clean air over that process step.

A rigid enclosure blocks maintenance access.Removable panels and open sides preserve service routes.

Air from a nearby door disrupts the local zone.A partial clear panel or curtain is placed on the identified draft side.

Aplicações típicas

Localized sensor assemblyClean inspection around a test fixtureSmall conveyor transfer pointsParticle-sensitive packaging steps

Parâmetros técnicos

Typical configurable construction ranges for a local clean-air workstation are listed below.

Material principal	Anodized aluminum modular frame with powder-coated steel filter housing and clear polycarbonate control panels
Painel de espessura	20-40 mm modular frame and panel sections
Largura efetiva	800-2500 mm protected process width
Comprimento máximo	Up to 3500 mm station length
Aço enfrentando espessura	0.8-1.2 mm powder-coated filter and utility housings
Densidade Core	Approximately 1200 kg/m³ for solid polycarbonate side panels
Condutividade térmica	0.19-0.22 W/(m·K) for polycarbonate panels
Superfície acabado	Natural anodized frame, white filter housing and clear hard-coated panels
Tipo conjunto	Bolted T-slot modular frame with gasketed fan-filter mounts and removable panel clips
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Vertical or horizontal airflowFixed or mobile framePartial curtains or rigid panelsConveyor and equipment cut-outs

Planning a Local Clean Air Workstation specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe