English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
محطة عمل الهواء النظيف المحلية
A modular open-frame station that places filtered clean air over one selected process step without enclosing the surrounding production area.
- Targeted Process Coverage
- Modular Open Frame
- Adjustable Airflow Footprint
- Equipment-Ready Work Zone
مقدمة المنتج
This workstation is configured around a specific instrument, assembly fixture or inspection step rather than a fixed clean-bench format. Fan-filter modules can be mounted above or behind the process, and clear panels or partial curtains are added only where they help control room drafts. The open frame leaves the process accessible for material loading and maintenance. Its purpose is localized non-hazardous product protection within an already managed indoor environment.
الخصائص الرئيسية
Open sides allow conveyors, fixtures and service access to pass through the station.
Partial panels control the most disruptive room-air directions without fully enclosing the operator.
Utility rails accept task lights, outlets and lightweight process accessories.
Independent controls allow the local airflow to operate with the process schedule.
مخاوف المنتج للعملاء
A standard bench can be the wrong shape for an installed process, while full-room upgrades may be unnecessary for one critical operation.
The process fixture cannot fit inside a conventional cabinet.An open modular frame is built around the installed equipment envelope.
Only one operation needs cleaner air than the surrounding room.Targeted fan-filter coverage concentrates clean air over that process step.
A rigid enclosure blocks maintenance access.Removable panels and open sides preserve service routes.
Air from a nearby door disrupts the local zone.A partial clear panel or curtain is placed on the identified draft side.
تطبيقات نموذجية
Localized sensor assemblyClean inspection around a test fixtureSmall conveyor transfer pointsParticle-sensitive packaging steps
المعلمات الفنية
Typical configurable construction ranges for a local clean-air workstation are listed below.
| المواد الأساسية | Anodized aluminum modular frame with powder-coated steel filter housing and clear polycarbonate control panels |
|---|---|
| سمك اللوحة | 20-40 mm modular frame and panel sections |
| العرض الفعال | 800-2500 mm protected process width |
| الحد الأقصى الطول | Up to 3500 mm station length |
| الصلب يواجه سمك | 0.8-1.2 mm powder-coated filter and utility housings |
| الكثافة الأساسية | Approximately 1200 kg/m³ for solid polycarbonate side panels |
| الموصلية الحرارية | 0.19-0.22 W / (m·K) لألواح البولي كربونات |
| إنهاء السطح | Natural anodized frame, white filter housing and clear hard-coated panels |
| نوع المشترك | Bolted T-slot modular frame with gasketed fan-filter mounts and removable panel clips |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Vertical or horizontal airflowFixed or mobile framePartial curtains or rigid panelsConveyor and equipment cut-outs
Planning a Local Clean Air Workstation specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
