Modular local clean-air workstation surrounding a process fixture

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

지역 청정 공기 워크스테이션

A modular open-frame station that places filtered clean air over one selected process step without enclosing the surrounding production area.

Targeted Process Coverage
Modular Open Frame
Adjustable Airflow Footprint
Equipment-Ready Work Zone

견적 요청 제품 찾아보기

상품 소개

This workstation is configured around a specific instrument, assembly fixture or inspection step rather than a fixed clean-bench format. Fan-filter modules can be mounted above or behind the process, and clear panels or partial curtains are added only where they help control room drafts. The open frame leaves the process accessible for material loading and maintenance. Its purpose is localized non-hazardous product protection within an already managed indoor environment.

주요 기능

The frame and filter position can be matched to the actual process footprint.

Open sides allow conveyors, fixtures and service access to pass through the station.

Partial panels control the most disruptive room-air directions without fully enclosing the operator.

Utility rails accept task lights, outlets and lightweight process accessories.

Independent controls allow the local airflow to operate with the process schedule.

고객 제품 관심사

A standard bench can be the wrong shape for an installed process, while full-room upgrades may be unnecessary for one critical operation.

The process fixture cannot fit inside a conventional cabinet.An open modular frame is built around the installed equipment envelope.

Only one operation needs cleaner air than the surrounding room.Targeted fan-filter coverage concentrates clean air over that process step.

A rigid enclosure blocks maintenance access.Removable panels and open sides preserve service routes.

Air from a nearby door disrupts the local zone.A partial clear panel or curtain is placed on the identified draft side.

일반적인 응용 프로그램

Localized sensor assemblyClean inspection around a test fixtureSmall conveyor transfer pointsParticle-sensitive packaging steps

기술 매개변수

Typical configurable construction ranges for a local clean-air workstation are listed below.

핵심 재료	Anodized aluminum modular frame with powder-coated steel filter housing and clear polycarbonate control panels
패널 두께	20-40 mm modular frame and panel sections
유효 폭	800-2500 mm protected process width
최대 길이	Up to 3500 mm station length
강철 면면 두께	0.8-1.2 mm powder-coated filter and utility housings
코어 밀도	Approximately 1200 kg/m³ for solid polycarbonate side panels
열전도도 (Thermal Conductivity)	0. 19 - 0. 22 W / (m · K) 폴리카보네이트 패널
표면 마무리	Natural anodized frame, white filter housing and clear hard-coated panels
접합 유형	Bolted T-slot modular frame with gasketed fan-filter mounts and removable panel clips
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Vertical or horizontal airflowFixed or mobile framePartial curtains or rigid panelsConveyor and equipment cut-outs

Planning a Local Clean Air Workstation specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.