Modular local clean-air workstation surrounding a process fixture

Aliran Laminar dan Peralatan Pengekangan

Stesen kerja udara bersih tempatan

A modular open-frame station that places filtered clean air over one selected process step without enclosing the surrounding production area.

Targeted Process Coverage
Modular Open Frame
Adjustable Airflow Footprint
Equipment-Ready Work Zone

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This workstation is configured around a specific instrument, assembly fixture or inspection step rather than a fixed clean-bench format. Fan-filter modules can be mounted above or behind the process, and clear panels or partial curtains are added only where they help control room drafts. The open frame leaves the process accessible for material loading and maintenance. Its purpose is localized non-hazardous product protection within an already managed indoor environment.

Ciri-ciri Utama

The frame and filter position can be matched to the actual process footprint.

Open sides allow conveyors, fixtures and service access to pass through the station.

Partial panels control the most disruptive room-air directions without fully enclosing the operator.

Utility rails accept task lights, outlets and lightweight process accessories.

Independent controls allow the local airflow to operate with the process schedule.

Kebimbangan Produk Pelanggan

A standard bench can be the wrong shape for an installed process, while full-room upgrades may be unnecessary for one critical operation.

The process fixture cannot fit inside a conventional cabinet.An open modular frame is built around the installed equipment envelope.

Only one operation needs cleaner air than the surrounding room.Targeted fan-filter coverage concentrates clean air over that process step.

A rigid enclosure blocks maintenance access.Removable panels and open sides preserve service routes.

Air from a nearby door disrupts the local zone.A partial clear panel or curtain is placed on the identified draft side.

Permohonan yang biasa

Localized sensor assemblyClean inspection around a test fixtureSmall conveyor transfer pointsParticle-sensitive packaging steps

Parameter teknikal

Typical configurable construction ranges for a local clean-air workstation are listed below.

Bahan Teras	Anodized aluminum modular frame with powder-coated steel filter housing and clear polycarbonate control panels
Ketebalan Panel	20-40 mm modular frame and panel sections
Lebar berkesan	800-2500 mm protected process width
Panjang maksimum	Up to 3500 mm station length
Keluli Menghadapi Ketebalan	0.8-1.2 mm powder-coated filter and utility housings
Ketumpatan teras	Approximately 1200 kg/m³ for solid polycarbonate side panels
Kekonduksian Terma	0.19-0.22 W / (m · K) untuk panel polikarbonat
Kemasan permukaan	Natural anodized frame, white filter housing and clear hard-coated panels
Jenis Bersatu	Bolted T-slot modular frame with gasketed fan-filter mounts and removable panel clips
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Vertical or horizontal airflowFixed or mobile framePartial curtains or rigid panelsConveyor and equipment cut-outs

Planning a Local Clean Air Workstation specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami