Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Laminar Flow und Containment Equipment
Lokale Clean Air Workstation
A modular open-frame station that places filtered clean air over one selected process step without enclosing the surrounding production area.
- Targeted Process Coverage
- Modular Open Frame
- Adjustable Airflow Footprint
- Equipment-Ready Work Zone
Produkteinführung
This workstation is configured around a specific instrument, assembly fixture or inspection step rather than a fixed clean-bench format. Fan-filter modules can be mounted above or behind the process, and clear panels or partial curtains are added only where they help control room drafts. The open frame leaves the process accessible for material loading and maintenance. Its purpose is localized non-hazardous product protection within an already managed indoor environment.
Key Features
Open sides allow conveyors, fixtures and service access to pass through the station.
Partial panels control the most disruptive room-air directions without fully enclosing the operator.
Utility rails accept task lights, outlets and lightweight process accessories.
Independent controls allow the local airflow to operate with the process schedule.
Kunden Produktbedenken
A standard bench can be the wrong shape for an installed process, while full-room upgrades may be unnecessary for one critical operation.
The process fixture cannot fit inside a conventional cabinet.An open modular frame is built around the installed equipment envelope.
Only one operation needs cleaner air than the surrounding room.Targeted fan-filter coverage concentrates clean air over that process step.
A rigid enclosure blocks maintenance access.Removable panels and open sides preserve service routes.
Air from a nearby door disrupts the local zone.A partial clear panel or curtain is placed on the identified draft side.
Typische Anwendungen
Localized sensor assemblyClean inspection around a test fixtureSmall conveyor transfer pointsParticle-sensitive packaging steps
Technische Parameter
Typical configurable construction ranges for a local clean-air workstation are listed below.
| Core Material | Anodized aluminum modular frame with powder-coated steel filter housing and clear polycarbonate control panels |
|---|---|
| Panel Dicke | 20-40 mm modular frame and panel sections |
| Effektive Breite | 800-2500 mm protected process width |
| Maximale Länge | Up to 3500 mm station length |
| Stahl facing Dicke | 0.8-1.2 mm powder-coated filter and utility housings |
| Kerndichte | Approximately 1200 kg/m³ for solid polycarbonate side panels |
| Thermische Leitfähigkeit | 0.19-0.22 W/(m·K) for polycarbonate panels |
| Oberfläche Finish | Natural anodized frame, white filter housing and clear hard-coated panels |
| Gemeinsamer Typ | Bolted T-slot modular frame with gasketed fan-filter mounts and removable panel clips |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Vertical or horizontal airflowFixed or mobile framePartial curtains or rigid panelsConveyor and equipment cut-outs
Planning a Local Clean Air Workstation specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
