Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistema de piso para sala limpa
Heavy Duty Epoxy Mortar Flooring
A trowel-applied epoxy and graded-aggregate mortar that builds a thick, high-strength wearing course for heavy traffic and local impact.
- 3–8 mm Mortar Build
- High Impact Resistance
- Graded Quartz Reinforcement
- Troweled Load-Bearing Surface
Introdução do produto
Heavy-duty epoxy mortar flooring combines epoxy resin, amine curing agent, pigment and carefully graded quartz aggregate in a dense trowel-applied screed. The aggregate-rich composition carries point loads and resists gouging more effectively than a thin coating, making it suitable beneath heavy carts, mobile equipment and repeated material transfer. A compatible grout or seal coat closes the textured mortar surface where cleanability is critical, while coves and local ramps can be formed from the same mortar family.
Características-chave
Trowel application accommodates worn concrete, local falls and thicker transitions around equipment bases.
The mortar can be finished with a pore-closing grout and protective topcoat for controlled production areas.
Localized repairs can rebuild damaged edges and ramps without replacing an entire slab section.
Preocupações do produto do cliente
Thin resin films can look intact yet fail quickly when concentrated wheels, dropped tools or damaged concrete impose high mechanical stress.
Small hard wheels crush or gouge a thin coating at turning points.A 3–8 mm aggregate-reinforced epoxy mortar spreads the load through a deeper wearing layer.
Pitted concrete telegraphs through a roller-applied finish.The troweled mortar rebuilds the profile before a grout and seal coat close the surface.
Equipment plinths and ramp edges chip under repeated impact.High-strength epoxy mortar can form dense edge details and bonded local transitions.
An open screed texture retains dirt in a controlled environment.A compatible epoxy grout coat fills surface pores and supports routine mechanical cleaning.
Aplicações típicas
Heavy cleanroom material-transfer routesEquipment maintenance baysPharmaceutical warehouse aislesProduction areas with loaded cartsPlant rooms and loading thresholds
Parâmetros técnicos
These values represent a typical quartz-filled, trowel-applied epoxy mortar flooring system.
| Material principal | Epoxy resin and amine hardener with pigment and selected graded quartz aggregate |
|---|---|
| Painel de espessura | 3.0–8.0 mm troweled mortar system thickness |
| Largura efetiva | Typically 1500–3000 mm hand-trowel placement strip width |
| Comprimento máximo | Typically up to 10000 mm work section before planned day joints |
| Aço enfrentando espessura | 0 mm; the load-bearing facing is epoxy mortar rather than steel |
| Densidade Core | Approximately 2100–2200 kg/m³ for the finished quartz-filled screed |
| Condutividade térmica | Typically 0.55–0.85 W/(m·K) for dense quartz-filled epoxy mortar |
| Superfície acabado | Troweled matte texture with optional epoxy grout and satin or gloss seal coat |
| Tipo conjunto | Primer-bonded mortar screed with keyed edges, sealed day joints and retained slab movement joints |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
3, 4, 6 or 8 mm nominal buildSmooth grouted or slip-resistant sealed surfaceHeavy-duty cove and ramp mortarChemical-resistant or UV-stable topcoat selection
Planning a Heavy-Duty Epoxy Mortar Flooring specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
