Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Flooring Systemen
Heavy Duty Epoxy Mortar Bodenboden
A trowel-applied epoxy and graded-aggregate mortar that builds a thick, high-strength wearing course for heavy traffic and local impact.
- 3–8 mm Mortar Build
- High Impact Resistance
- Graded Quartz Reinforcement
- Troweled Load-Bearing Surface
Produkteinführung
Heavy-duty epoxy mortar flooring combines epoxy resin, amine curing agent, pigment and carefully graded quartz aggregate in a dense trowel-applied screed. The aggregate-rich composition carries point loads and resists gouging more effectively than a thin coating, making it suitable beneath heavy carts, mobile equipment and repeated material transfer. A compatible grout or seal coat closes the textured mortar surface where cleanability is critical, while coves and local ramps can be formed from the same mortar family.
Key Features
Trowel application accommodates worn concrete, local falls and thicker transitions around equipment bases.
The mortar can be finished with a pore-closing grout and protective topcoat for controlled production areas.
Localized repairs can rebuild damaged edges and ramps without replacing an entire slab section.
Kunden Produktbedenken
Thin resin films can look intact yet fail quickly when concentrated wheels, dropped tools or damaged concrete impose high mechanical stress.
Small hard wheels crush or gouge a thin coating at turning points.A 3–8 mm aggregate-reinforced epoxy mortar spreads the load through a deeper wearing layer.
Pitted concrete telegraphs through a roller-applied finish.The troweled mortar rebuilds the profile before a grout and seal coat close the surface.
Equipment plinths and ramp edges chip under repeated impact.High-strength epoxy mortar can form dense edge details and bonded local transitions.
An open screed texture retains dirt in a controlled environment.A compatible epoxy grout coat fills surface pores and supports routine mechanical cleaning.
Typische Anwendungen
Heavy cleanroom material-transfer routesEquipment maintenance baysPharmaceutical warehouse aislesProduction areas with loaded cartsPlant rooms and loading thresholds
Technische Parameter
These values represent a typical quartz-filled, trowel-applied epoxy mortar flooring system.
| Core Material | Epoxy resin and amine hardener with pigment and selected graded quartz aggregate |
|---|---|
| Panel Dicke | 3.0–8.0 mm troweled mortar system thickness |
| Effektive Breite | Typically 1500–3000 mm hand-trowel placement strip width |
| Maximale Länge | Typically up to 10000 mm work section before planned day joints |
| Stahl facing Dicke | 0 mm; the load-bearing facing is epoxy mortar rather than steel |
| Kerndichte | Approximately 2100–2200 kg/m³ for the finished quartz-filled screed |
| Thermische Leitfähigkeit | Typically 0.55–0.85 W/(m·K) for dense quartz-filled epoxy mortar |
| Oberfläche Finish | Troweled matte texture with optional epoxy grout and satin or gloss seal coat |
| Gemeinsamer Typ | Primer-bonded mortar screed with keyed edges, sealed day joints and retained slab movement joints |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
3, 4, 6 or 8 mm nominal buildSmooth grouted or slip-resistant sealed surfaceHeavy-duty cove and ramp mortarChemical-resistant or UV-stable topcoat selection
Planning a Heavy-Duty Epoxy Mortar Flooring specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
