Steel-gray heavy-duty epoxy mortar flooring sample with fine quartz aggregate

클린룸 바닥 시스템

Heavy Duty Epoxy Mortar Flooring (중형 에폭시 모르타르 바닥재)

A trowel-applied epoxy and graded-aggregate mortar that builds a thick, high-strength wearing course for heavy traffic and local impact.

3–8 mm Mortar Build
High Impact Resistance
Graded Quartz Reinforcement
Troweled Load-Bearing Surface

견적 요청 제품 찾아보기

상품 소개

Heavy-duty epoxy mortar flooring combines epoxy resin, amine curing agent, pigment and carefully graded quartz aggregate in a dense trowel-applied screed. The aggregate-rich composition carries point loads and resists gouging more effectively than a thin coating, making it suitable beneath heavy carts, mobile equipment and repeated material transfer. A compatible grout or seal coat closes the textured mortar surface where cleanability is critical, while coves and local ramps can be formed from the same mortar family.

주요 기능

Graded quartz aggregate creates a compact load-bearing matrix with high resistance to impact and abrasion.

Trowel application accommodates worn concrete, local falls and thicker transitions around equipment bases.

The mortar can be finished with a pore-closing grout and protective topcoat for controlled production areas.

Localized repairs can rebuild damaged edges and ramps without replacing an entire slab section.

고객 제품 관심사

Thin resin films can look intact yet fail quickly when concentrated wheels, dropped tools or damaged concrete impose high mechanical stress.

Small hard wheels crush or gouge a thin coating at turning points.A 3–8 mm aggregate-reinforced epoxy mortar spreads the load through a deeper wearing layer.

Pitted concrete telegraphs through a roller-applied finish.The troweled mortar rebuilds the profile before a grout and seal coat close the surface.

Equipment plinths and ramp edges chip under repeated impact.High-strength epoxy mortar can form dense edge details and bonded local transitions.

An open screed texture retains dirt in a controlled environment.A compatible epoxy grout coat fills surface pores and supports routine mechanical cleaning.

일반적인 응용 프로그램

Heavy cleanroom material-transfer routesEquipment maintenance baysPharmaceutical warehouse aislesProduction areas with loaded cartsPlant rooms and loading thresholds

기술 매개변수

These values represent a typical quartz-filled, trowel-applied epoxy mortar flooring system.

핵심 재료	Epoxy resin and amine hardener with pigment and selected graded quartz aggregate
패널 두께	3.0–8.0 mm troweled mortar system thickness
유효 폭	Typically 1500–3000 mm hand-trowel placement strip width
최대 길이	Typically up to 10000 mm work section before planned day joints
강철 면면 두께	0 mm; the load-bearing facing is epoxy mortar rather than steel
코어 밀도	Approximately 2100–2200 kg/m³ for the finished quartz-filled screed
열전도도 (Thermal Conductivity)	Typically 0.55–0.85 W/(m·K) for dense quartz-filled epoxy mortar
표면 마무리	Troweled matte texture with optional epoxy grout and satin or gloss seal coat
접합 유형	Primer-bonded mortar screed with keyed edges, sealed day joints and retained slab movement joints
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

3, 4, 6 or 8 mm nominal buildSmooth grouted or slip-resistant sealed surfaceHeavy-duty cove and ramp mortarChemical-resistant or UV-stable topcoat selection

Planning a Heavy-Duty Epoxy Mortar Flooring specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.