Steel-gray heavy-duty epoxy mortar flooring sample with fine quartz aggregate

Sistem Lantai Bilik Bersih

Lantai mortar epoksi tugas berat

A trowel-applied epoxy and graded-aggregate mortar that builds a thick, high-strength wearing course for heavy traffic and local impact.

3–8 mm Mortar Build
High Impact Resistance
Graded Quartz Reinforcement
Troweled Load-Bearing Surface

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Heavy-duty epoxy mortar flooring combines epoxy resin, amine curing agent, pigment and carefully graded quartz aggregate in a dense trowel-applied screed. The aggregate-rich composition carries point loads and resists gouging more effectively than a thin coating, making it suitable beneath heavy carts, mobile equipment and repeated material transfer. A compatible grout or seal coat closes the textured mortar surface where cleanability is critical, while coves and local ramps can be formed from the same mortar family.

Ciri-ciri Utama

Graded quartz aggregate creates a compact load-bearing matrix with high resistance to impact and abrasion.

Trowel application accommodates worn concrete, local falls and thicker transitions around equipment bases.

The mortar can be finished with a pore-closing grout and protective topcoat for controlled production areas.

Localized repairs can rebuild damaged edges and ramps without replacing an entire slab section.

Kebimbangan Produk Pelanggan

Thin resin films can look intact yet fail quickly when concentrated wheels, dropped tools or damaged concrete impose high mechanical stress.

Small hard wheels crush or gouge a thin coating at turning points.A 3–8 mm aggregate-reinforced epoxy mortar spreads the load through a deeper wearing layer.

Pitted concrete telegraphs through a roller-applied finish.The troweled mortar rebuilds the profile before a grout and seal coat close the surface.

Equipment plinths and ramp edges chip under repeated impact.High-strength epoxy mortar can form dense edge details and bonded local transitions.

An open screed texture retains dirt in a controlled environment.A compatible epoxy grout coat fills surface pores and supports routine mechanical cleaning.

Permohonan yang biasa

Heavy cleanroom material-transfer routesEquipment maintenance baysPharmaceutical warehouse aislesProduction areas with loaded cartsPlant rooms and loading thresholds

Parameter teknikal

These values represent a typical quartz-filled, trowel-applied epoxy mortar flooring system.

Bahan Teras	Epoxy resin and amine hardener with pigment and selected graded quartz aggregate
Ketebalan Panel	3.0–8.0 mm troweled mortar system thickness
Lebar berkesan	Typically 1500–3000 mm hand-trowel placement strip width
Panjang maksimum	Typically up to 10000 mm work section before planned day joints
Keluli Menghadapi Ketebalan	0 mm; the load-bearing facing is epoxy mortar rather than steel
Ketumpatan teras	Approximately 2100–2200 kg/m³ for the finished quartz-filled screed
Kekonduksian Terma	Typically 0.55–0.85 W/(m·K) for dense quartz-filled epoxy mortar
Kemasan permukaan	Troweled matte texture with optional epoxy grout and satin or gloss seal coat
Jenis Bersatu	Primer-bonded mortar screed with keyed edges, sealed day joints and retained slab movement joints
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

3, 4, 6 or 8 mm nominal buildSmooth grouted or slip-resistant sealed surfaceHeavy-duty cove and ramp mortarChemical-resistant or UV-stable topcoat selection

Planning a Heavy-Duty Epoxy Mortar Flooring specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami